Transcend Information TS192GSSD25S-M dimensions Write Multiple EXT 39h, Write Multiple FUA EXT CEh

Page 37

TS8GSSD25S-S

 

TS16GSSD25S-S/M

 

TS32GSSD25S-S/M

 

TS64GSSD25S-S/M

 

TS128GSSD25S-M

2.5” Solid State Disk

TS192GSSD25S-M

WRITE MULTIPLE EXT (39h)

48-bit feature set mandatory command. This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set Multiple command.

WRITE MULTIPLE FUA EXT (CEh)

48-bit feature set mandatory command. This command provides the same functionality as the WRITE MULTIPLE EXT command except that regardless of whether volatile and/or non-volatile write caching in the device is enabled or not, the user data shall be written to non-volatile media before command completion is reported.

WRITE SECTOR(S) (30h/31h)

Write data to a specified number of sectors (1 to 256, as specified with the Sector Count register) from the specified address. Specify “00h” to write 256 sectors.

WRITE SECTOR(S) EXT (34h)

48-bit feature set mandatory command. Write data to a specified number of sectors (1 to 65536, as specified with the Sector Count register) from the specified address. Specify “00h” to write 65536 sectors.

Transcend Information Inc.

37

V1.08

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Dimensions Placement FeaturesDescription V1.08Specifications Sequential WriteMax Model P/N Sequential ReadMaxModel P/N User Max. LBA Cylinder Head Sector Operating Non-Operating Data Reliability Data RetentionCompliance Package Dimensions Pin Layout Pin AssignmentsPin No Pin Name Block Diagram Wear-Leveling algorithm ReliabilityECC algorithm Bad-block managementSata Interface Out of bank signalingComreset TS192GSSD25S-M Cominit TS192GSSD25S-M Power on sequence Power on sequence timing diagramATA command register Command Name Code Command TableSET Features ATA Command Specifications Word Value Description Identify Device Information Default ValuePIO data transfer cycle timing mode Reserved TS192GSSD25S-M Minor version number TS192GSSD25S-M TS192GSSD25S-M Current AAM value 15-8 Vendor’s recommended AAM value 95-99 Idle Immediate E1h Idle E3hInitialize Device Parameters 91h Read Buffer E4hRead DMA EXT 25h Log Address Log Name Feature Set AccessRead Fpdma Queued 60h Read LOG EXT 2FhRead Verify Sectors 40h/41h Security Disable Password F6hRead Verify Sectors EXT 42h Recalibrate 10hSecurity SET Password F1h Security set Password data contentSecurity Unlock F2h Features register Value and settable operating mode Smart Function Set B0h Code Smart SubcommandByte Description Byte 2-361 Individual attribute dataDescription Detail Information Byte Attribute ID information is listed in the following tableSmart Read Attribute Threshold Smart Enabl Operations Standby Immediate E0h Standby E2hWrite Buffer E8h Write DMA CAhWrite Multiple FUA EXT CEh Write Multiple EXT 39hWrite Sectors 30h/31h Write Sectors EXT 34hTaiwan Germany Ordering Information
Top Page Image Contents