Dell DL4000 owner manual Using Your System Password To Secure Your System

Page 25

6.Re-enter the system password that you entered earlier and click OK.

7.Select Setup Password, enter your system password and press <Enter> or <Tab>. A message prompts you to re-enter the setup password.

8.Re-enter the setup password that you entered earlier and click OK.

9.Press <Esc> to return to the System BIOS screen. Press <Esc> again, and a message prompts you to save the changes.

NOTE: Password protection does not take effect until the system reboots.

Deleting Or Changing An Existing System And/Or Setup Password

Ensure that the Password jumper is set to enabled and the Password Status is Unlocked before attempting to delete or change the existing System and/or Setup password. You cannot delete or change an existing System or Setup password if the Password Status is Locked.

To delete or change the existing System and/or Setup password:

1.To enter System Setup, press <F2> immediately after a power-on or reboot.

2.In the System Setup Main Menu, select System BIOS and press <Enter>. The System BIOS screen is displayed.

3.In the System BIOS Screen, select System Security and press <Enter>. The System Security screen is displayed.

4.In the System Security screen, verify that Password Status is Unlocked.

5.Select System Password, alter or delete the existing system password and press <Enter> or <Tab>.

6.Select Setup Password, alter or delete the existing setup password and press <Enter> or <Tab>.

NOTE: If you change the System and/or Setup password a message prompts you to re-enter the new password. If you delete the System and/or Setup password, a message prompts you to confirm the deletion.

7.Press <Esc> to return to the System BIOS screen. Press <Esc> again, and a message prompts you to save the changes.

NOTE: You can disable password security while logging on to the system. To disable the password security, turn on or reboot your system, type your password and press <Ctrl><Enter>.

Using Your System Password To Secure Your System

NOTE: If you have assigned a setup password, the system accepts your setup password as an alternate system password.

1.Turn on or reboot your system.

2.Type your password and press <Enter>.

When Password Status is Locked, type the password and press <Enter> when prompted at reboot.

If an incorrect system password is entered, the system displays a message and prompts you to re-enter your password. You have three attempts to enter the correct password. After the third unsuccessful attempt, the system displays an error message that the system has halted and must be powered down.

Even after you shut down and restart the system, the error message is displayed until the correct password is entered.

NOTE: You can use the Password Status option in conjunction with the System Password and Setup Password options to protect your system from unauthorized changes.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Regulatory Model E16S Series Regulatory Type E16S001 Dell Inc Contents Installing The Cooling Shroud Using System Diagnostics Troubleshooting Your SystemTechnical Specifications System Messages Jumpers And ConnectorsGetting Help Indicator, Button, or Icon Description Connector Front-Panel Features And IndicatorsElectrical indicator Condition Diagnostic IndicatorsCorrective Action Error occurs Hard-Drive Indicator PatternsDrive-Status Condition Indicator Pattern RAID Only Amber if a memorySeconds Back-Panel Features And IndicatorsPower Indicator Codes NIC Indicator CodesGreen Link indicator is Other Information You May Need Guide Manuals Users Guide Getting StartedGuide Release Notes Page Entering System Setup Responding To Error Messages System Setup OptionsUsing The System Setup Navigation Keys System Setup Main ScreenSystem Information Screen Memory Settings ScreenProcessor Settings Screen Boot Settings Screen Sata Settings ScreenIntegrated Devices Screen Serial Communications Screen System Profile Settings ScreenSystem Security Screen Miscellaneous Settings Assigning a System And/Or Setup Password System And Setup Password FeaturesSet to Enabled Using Your System Password To Secure Your System Operating With a Setup Password Enabled IDRAC Settings UtilityEntering The iDRAC Settings Utility Embedded System ManagementFront Bezel Optional Recommended ToolsRemoving The Front Bezel Opening And Closing The System Installing The Front BezelOpening The System Closing The System Inside The SystemRemoving The Cooling Shroud Cooling ShroudSystem Memory Installing The Cooling ShroudChannel 0 slots A1, A5, and A9 ProcessorMode-Specific Guidelines Memory ConfigurationRemoving Memory Modules Number Dimm Rank Dimm Slot PopulationMemory module/memory-module blank Time Installing Memory ModulesHard Drives Installing The Memory ModuleRemoving a Hot-Swap Hard Drive Installing a Hot-Swap Hard DriveRemoving a Hard Drive From a Hard-Drive Carrier Cooling Fans Installing a Hard Drive Into a Hard-Drive CarrierRemoving a Cooling Fan Expansion Card Installation Guidelines Installing a Cooling FanExpansion Cards And Expansion-Card Risers Riser PCIe Slot Removing An Expansion CardHeight Length Link Width Slot Width Card Priority Card Type Slot Priority Max AllowedRemoving and Installing the Expansion Card Installing An Expansion CardRemoving Expansion-Card Risers Removing and Installing the Expansion Card RiserSD vFlash Card Installing Expansion-Card RisersReplacing An SD vFlash Card Internal Dual SD ModuleRemoving The Internal Dual SD Module Removing and Installing the Internal Dual SD Module Installing The Internal Dual SD ModuleInternal SD Card Installing An Internal SD CardIntegrated Storage Controller Card Removing An Internal SD CardRemoving The Integrated Storage Controller Network Daughter Card Installing The Integrated Storage ControllerRemoving The Network Daughter Card Processors Installing The Network Daughter CardRemoving a Processor Removing and Installing the Heat Sink Close-lock symbol Removing and Installing a Processor Installing a ProcessorYour system supports two 750 W power supplies Power SuppliesRemoving An AC Power Supply Hot Spare FeatureInstalling An AC Power Supply System BatteryReplacing The System Battery Removing the System Battery Cover Removing The Hard-Drive Backplane Hard-Drive BackplaneBackplane signal cable SD card socket Cabling Diagram-2.5 Inch Systems Installing The Hard-Drive BackplaneRemoving The Control Panel Control Panel AssemblyRemoving and Installing the Control Panel Installing The Control PanelRemoving The System Board System BoardSystem board System-board holder Release pin Installing The System Board Troubleshooting The Video Subsystem Troubleshooting External ConnectionsTroubleshooting a USB Device Troubleshooting a NIC Troubleshooting a Serial I/O DeviceTroubleshooting a Damaged System Troubleshooting a Wet SystemTroubleshooting Power Supplies Troubleshooting The System BatteryTroubleshooting Cooling Fans Troubleshooting Cooling ProblemsTroubleshooting System Memory Reseat the memory modules in their sockets Close the system Troubleshooting An SD CardTroubleshooting a Storage Controller Troubleshooting a Hard DriveTroubleshooting Expansion Cards Troubleshooting Processors Page When To Use The Embedded System Diagnostics Dell Online Diagnostics Dell Embedded System DiagnosticsRunning The Embedded System Diagnostics Least one event description is recorded System Diagnostic ControlsJumper Setting Description System Board Jumper SettingsConnector Description System Board ConnectorsJCOM1 Disabling a Forgotten Password Configuration High Capacity Expansion slots using riser cardConfiguration Drives Connectors BackExpanded Operating Temperature Connectors High CapacityFront InternalTemperature Continuous Operation Environmental TemperatureRelative Humidity Maximum VibrationOperating Altitude De-rating EnvironmentalParticulate Contamination Gaseous ContaminationSystem Error Messages ASR0002 Message ASR0001 MessageASR0003 Message BAT0002 MessageCPU0005 Message CPU0001 MessageCPU0010 Message CPU0023 MessageException is external to the processor CPU0701 Message CPU number protocol error detected DetailsCPU0702 Message CPU0703 MessageFAN0000 Message Action Reinstall or reconnect the hardware HWC2003 MessageDetails Fan operating speed is out of range Action FAN0001 MessageMEM0007 Message MEM0001 MessageMEM0701 Message MEM0702 MessagePCI1302 Message MEM8000 MessagePCI1304 Message PCI1308 MessagePDR0001 Message Fault detected on drive number Details Reinstall the deviceConfigurations PSU0001 Message Power supply number failed ActionPSU0003 Message PSU0002 MessagePSU0006 Message PSU0016 MessagePSU0034 Message PSU0033 MessagePSU0035 Message PSU0036 MessageSystem power inventory change PSU1201 Message Power supply redundancy is lost DetailsConfiguration and power consumption System power consumptionRFM1201 Message RFM1014 MessageRFM2001 Message RFM2002 MessageAppear if the user disabled event logging SEL0006 Message All event logging is disabled DetailsPower. If problem persists call support Issues persists, contact supportFailed TMP0119 MessageFailures TMP0121 MessageAlert Messages Diagnostic Messages102 Contacting Dell Locating Your System Service TagDocumentation Feedback
Related manuals
Manual 11 pages 38.93 Kb Manual 4 pages 41.95 Kb

DL4000 specifications

The Dell DL4000 is an innovative and robust data protection solution designed to meet the storage and backup needs of modern businesses. This appliance, part of Dell's Data Domain family, provides reliable data backup, recovery, and archiving, enhancing efficiency in managing critical business data.

One of the standout features of the DL4000 is its integration of advanced deduplication technology. This allows businesses to significantly reduce the amount of storage required for backup data by eliminating duplicate copies of files. The result is reduced storage costs and improved backup speeds, enabling organizations to save both time and resources.

The DL4000 also boasts scalable capacity, which is essential for growing businesses. With the ability to increase storage volume without significant infrastructure changes, organizations can easily adapt the appliance to changing data requirements. The product is available in various configurations, offering flexible options to meet diverse business needs.

Another key characteristic is its high performance in data protection tasks. The DL4000 provides quick backup and recovery capabilities, thanks to its efficient data processing algorithms. Organizations can restore critical data swiftly, minimizing downtime and ensuring business continuity in the event of data loss. The appliance supports multiple backup sources, including virtual machines, physical servers, and cloud environments, providing flexibility in data management.

Additionally, the DL4000 is equipped with robust security features. It supports encryption both at rest and in transit, ensuring that sensitive data is protected from unauthorized access. Compliance with industry regulations is simplified, aiding organizations in maintaining data integrity and confidentiality.

User-friendliness is another highlight of the Dell DL4000. The intuitive management interface allows IT administrators to monitor and manage backups with ease. Automation features help streamline backup processes, reducing the likelihood of human error and ensuring consistent data protection.

In conclusion, the Dell DL4000 offers a comprehensive data protection solution that combines advanced technologies with user-centric design. Its deduplication capabilities, scalability, high performance, security features, and ease of use make it an ideal choice for businesses looking to enhance their data backup and recovery strategies. Organizations investing in the DL4000 can be confident that they are adopting a powerful tool to safeguard their valuable data assets.
Top Page Image Contents