3
Installing System Components
NOTE: Solution validation was performed using the factory shipped hardware configuration.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Recommended Tools
You may need the following items to perform the procedures in this section:
•Key to the system keylock
•#1 and #2 Phillips screwdrivers
•T10 and T15 Torx screwdrivers
•Wrist grounding strap connected to ground
Front Bezel (Optional)
Removing The Front Bezel
1.Unlock the keylock at the left end of the bezel.
2.Lift the release latch next to the keylock.
3.Rotate the left end of the bezel away from the front panel.
4.Unhook the right end of the bezel and pull the bezel away from the system.
Figure 6. Removing and Installing the Front Bezel
1. release latch
27