Dell DL4000 owner manual Hard Drives, Installing The Memory Module

Page 36

Figure 13. Installing The Memory Module

1.memory module

2.memory-module ejectors

3.memory-module socket alignment key

4.memory-module alignment key

NOTE: When the memory module is properly seated in the socket, the levers on the memory-module socket align with the levers on the other identical sockets that have memory modules installed.

8.Repeat step 4 through step 7 of this procedure to install the remaining memory modules.

9.Replace the cooling shroud.

10.Close the system.

11.Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.

12.Press <F2> to enter the System Setup, and check the memory settings.

The system should have already changed the value to reflect the newly installed memory.

13.If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 4 through step 7 of this procedure, checking to ensure that the memory modules are firmly seated in their sockets.

14.Run the appropriate diagnostic test. For more information, see Using System Diagnostics.

Hard Drives

All hard drives connect to the system board through the hard-drive backplane. Hard drives are supplied in hot- swappable hard-drive carriers that fit in the hard-drive slots.

CAUTION: Before attempting to remove or install a hard drive while the system is running, see the documentation for the storage controller card to ensure that the host adapter is configured correctly to support hot-swap hard drive removal and insertion.

CAUTION: Do not turn off or reboot your system while the hard drive is being formatted. Doing so can cause a hard drive failure.

NOTE: Use only hard drives that have been tested and approved for use with the hard-drive backplane.

When you format a hard drive, allow enough time for the formatting to be completed. Be aware that high-capacity hard drives can take a number of hours to format.

36

Image 36
Contents Regulatory Model E16S Series Regulatory Type E16S001 Dell Inc Contents Installing The Cooling Shroud Troubleshooting Your System Using System DiagnosticsJumpers And Connectors Technical Specifications System MessagesGetting Help Front-Panel Features And Indicators Indicator, Button, or Icon Description ConnectorDiagnostic Indicators Electrical indicator ConditionCorrective Action Hard-Drive Indicator Patterns Error occursDrive-Status Condition Indicator Pattern RAID Only Amber if a memoryBack-Panel Features And Indicators SecondsNIC Indicator Codes Power Indicator CodesGreen Link indicator is Other Information You May Need Getting Started Guide Manuals Users GuideGuide Release Notes Page Entering System Setup System Setup Options Responding To Error MessagesUsing The System Setup Navigation Keys System Setup Main ScreenMemory Settings Screen System Information ScreenProcessor Settings Screen Sata Settings Screen Boot Settings ScreenIntegrated Devices Screen System Profile Settings Screen Serial Communications ScreenSystem Security Screen Miscellaneous Settings System And Setup Password Features Assigning a System And/Or Setup PasswordSet to Enabled Using Your System Password To Secure Your System IDRAC Settings Utility Operating With a Setup Password EnabledEntering The iDRAC Settings Utility Embedded System ManagementRecommended Tools Front Bezel OptionalRemoving The Front Bezel Installing The Front Bezel Opening And Closing The SystemOpening The System Inside The System Closing The SystemCooling Shroud Removing The Cooling ShroudInstalling The Cooling Shroud System MemoryProcessor Channel 0 slots A1, A5, and A9Memory Configuration Mode-Specific GuidelinesRemoving Memory Modules Number Dimm Rank Dimm Slot PopulationMemory module/memory-module blank Installing Memory Modules TimeInstalling The Memory Module Hard DrivesInstalling a Hot-Swap Hard Drive Removing a Hot-Swap Hard DriveRemoving a Hard Drive From a Hard-Drive Carrier Installing a Hard Drive Into a Hard-Drive Carrier Cooling FansRemoving a Cooling Fan Installing a Cooling Fan Expansion Card Installation GuidelinesExpansion Cards And Expansion-Card Risers Removing An Expansion Card Riser PCIe SlotHeight Length Link Width Slot Width Card Priority Card Type Slot Priority Max AllowedInstalling An Expansion Card Removing and Installing the Expansion CardRemoving and Installing the Expansion Card Riser Removing Expansion-Card RisersInstalling Expansion-Card Risers SD vFlash CardInternal Dual SD Module Replacing An SD vFlash CardRemoving The Internal Dual SD Module Installing The Internal Dual SD Module Removing and Installing the Internal Dual SD ModuleInstalling An Internal SD Card Internal SD CardIntegrated Storage Controller Card Removing An Internal SD CardRemoving The Integrated Storage Controller Installing The Integrated Storage Controller Network Daughter CardRemoving The Network Daughter Card Installing The Network Daughter Card ProcessorsRemoving a Processor Removing and Installing the Heat Sink Close-lock symbol Installing a Processor Removing and Installing a ProcessorPower Supplies Your system supports two 750 W power suppliesHot Spare Feature Removing An AC Power SupplySystem Battery Installing An AC Power SupplyReplacing The System Battery Removing the System Battery Cover Hard-Drive Backplane Removing The Hard-Drive BackplaneBackplane signal cable SD card socket Installing The Hard-Drive Backplane Cabling Diagram-2.5 Inch SystemsControl Panel Assembly Removing The Control PanelInstalling The Control Panel Removing and Installing the Control PanelSystem Board Removing The System BoardSystem board System-board holder Release pin Installing The System Board Troubleshooting External Connections Troubleshooting The Video SubsystemTroubleshooting a USB Device Troubleshooting a Serial I/O Device Troubleshooting a NICTroubleshooting a Wet System Troubleshooting a Damaged SystemTroubleshooting The System Battery Troubleshooting Power SuppliesTroubleshooting Cooling Problems Troubleshooting Cooling FansTroubleshooting System Memory Troubleshooting An SD Card Reseat the memory modules in their sockets Close the systemTroubleshooting a Hard Drive Troubleshooting a Storage ControllerTroubleshooting Expansion Cards Troubleshooting Processors Page Dell Online Diagnostics Dell Embedded System Diagnostics When To Use The Embedded System DiagnosticsRunning The Embedded System Diagnostics System Diagnostic Controls Least one event description is recordedSystem Board Jumper Settings Jumper Setting DescriptionSystem Board Connectors Connector DescriptionJCOM1 Disabling a Forgotten Password Expansion slots using riser card Configuration High CapacityConfiguration Drives Connectors BackConnectors High Capacity Expanded Operating TemperatureFront InternalEnvironmental Temperature Temperature Continuous OperationRelative Humidity Maximum VibrationEnvironmental Operating Altitude De-ratingParticulate Contamination Gaseous ContaminationSystem Error Messages ASR0001 Message ASR0002 MessageASR0003 Message BAT0002 MessageCPU0001 Message CPU0005 MessageCPU0010 Message CPU0023 MessageCPU0701 Message CPU number protocol error detected Details Exception is external to the processorCPU0702 Message CPU0703 MessageAction Reinstall or reconnect the hardware HWC2003 Message FAN0000 MessageDetails Fan operating speed is out of range Action FAN0001 MessageMEM0001 Message MEM0007 MessageMEM0701 Message MEM0702 MessageMEM8000 Message PCI1302 MessagePCI1304 Message PCI1308 MessageReinstall the device PDR0001 Message Fault detected on drive number DetailsConfigurations PSU0001 Message Power supply number failed ActionPSU0002 Message PSU0003 MessagePSU0006 Message PSU0016 MessagePSU0033 Message PSU0034 MessagePSU0035 Message PSU0036 MessagePSU1201 Message Power supply redundancy is lost Details System power inventory changeConfiguration and power consumption System power consumptionRFM1014 Message RFM1201 MessageRFM2001 Message RFM2002 MessageSEL0006 Message All event logging is disabled Details Appear if the user disabled event loggingPower. If problem persists call support Issues persists, contact supportTMP0119 Message FailedFailures TMP0121 MessageDiagnostic Messages Alert Messages102 Locating Your System Service Tag Contacting DellDocumentation Feedback
Related manuals
Manual 11 pages 38.93 Kb Manual 4 pages 41.95 Kb

DL4000 specifications

The Dell DL4000 is an innovative and robust data protection solution designed to meet the storage and backup needs of modern businesses. This appliance, part of Dell's Data Domain family, provides reliable data backup, recovery, and archiving, enhancing efficiency in managing critical business data.

One of the standout features of the DL4000 is its integration of advanced deduplication technology. This allows businesses to significantly reduce the amount of storage required for backup data by eliminating duplicate copies of files. The result is reduced storage costs and improved backup speeds, enabling organizations to save both time and resources.

The DL4000 also boasts scalable capacity, which is essential for growing businesses. With the ability to increase storage volume without significant infrastructure changes, organizations can easily adapt the appliance to changing data requirements. The product is available in various configurations, offering flexible options to meet diverse business needs.

Another key characteristic is its high performance in data protection tasks. The DL4000 provides quick backup and recovery capabilities, thanks to its efficient data processing algorithms. Organizations can restore critical data swiftly, minimizing downtime and ensuring business continuity in the event of data loss. The appliance supports multiple backup sources, including virtual machines, physical servers, and cloud environments, providing flexibility in data management.

Additionally, the DL4000 is equipped with robust security features. It supports encryption both at rest and in transit, ensuring that sensitive data is protected from unauthorized access. Compliance with industry regulations is simplified, aiding organizations in maintaining data integrity and confidentiality.

User-friendliness is another highlight of the Dell DL4000. The intuitive management interface allows IT administrators to monitor and manage backups with ease. Automation features help streamline backup processes, reducing the likelihood of human error and ensuring consistent data protection.

In conclusion, the Dell DL4000 offers a comprehensive data protection solution that combines advanced technologies with user-centric design. Its deduplication capabilities, scalability, high performance, security features, and ease of use make it an ideal choice for businesses looking to enhance their data backup and recovery strategies. Organizations investing in the DL4000 can be confident that they are adopting a powerful tool to safeguard their valuable data assets.