MGE UPS Systems Switched PDU user manual Operations, Creating a descriptive tower name, Examples

Page 38

3. Operations

Creating a descriptive tower name

The Set Tower Name command assigns a descriptive name to a tower. This descriptive name is displayed when the Show Traps command is issued. See SNMP Traps on page 49 for more information on the Show Traps command.

To create a tower name:

At the Switched PDU: prompt, type set tower name, followed by the absolute tower name, then the descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not allowed). Press Enter.

Examples

The following command adds the descriptive name Florida_HQ_1 to tower .a:

Switched PDU: set tower name .a Florida_HQ_1<Enter>

Displaying tower information

The Show Towers command displays information about the Switched PDU. This information includes the absolute and descriptive Switched PDU names.

To display tower information:

At the Switched PDU: prompt, type show towers and press Enter.

Example

Switched PDU: show towers<Enter>

Tower Tower

ID Name

.A Florida_HQ_1

Creating a descriptive infeed name

The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is displayed when the Show Traps command is issued.

To create a infeed name:

At the Switched PDU: prompt, type set infeed name, followed by the absolute infeed name, then the descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not allowed). Press Enter.

Example

The following command adds the descriptive name HQ_1_Infeed_A to the infeed on the Switched PDU:

Switched PDU: set infeed name .aa HQ_1_Infeed_A<Enter>

Displaying Infeed information

The Show Infeeds command displays information about all infeeds. This information includes the absolute and descriptive infeed names.

To display tower information:

At the Switched PDU: prompt, type show infeeds and press Enter.

Example

Switched PDU: show infeeds<Enter>

Input Input Feed ID Feed Name

.AA HQ_1_Infeed_A

.AB HQ_1_Infeed_B

.BA HQ_2_Infeed_A

.BB HQ_2_Infeed_B

Page 38 - 301-0399-4 Rev A.

Image 38

Contents Switched PDU Installation and user manual E T N I N U E H TProtective Grounding Terminal InstructionsDangerous Voltage Life-Support PolicyGETTING STARTED ContentsINSTALLATION OPERATIONSuser account prior to attachment to your network 1. Getting StartedQuick Start Guide Additional Required Items 2. InstallationStandard Accessories 1 Power Input 2 Input Current LED 3 Ethernet / RS232 Ports Equipment OverviewFigure 1. Unit Views 4 Temperature / Humidity PortsFigure 2. Retention Bracket assembly Safety PrecautionsInstalling the Power Input Retention Bracket To install the power input retention bracketTo connect to the power source Connecting to the Power SourceTo attach a power cord to the unit MountingConnecting to the Unit Connecting DevicesConnecting the Sensors Serial RS232 portPage HTML I NTERFACE 3. OperationsI NTERFACES C OMMAND L INE I NTERFACEInterfaces Usernames and Passwords3. Operations Outlet Naming and GroupingTo log in by HTML HTML InterfaceFigure 4. Example HTML page Logging In Group Outlet ControlIndividual Outlet State/Control State Field ValuesInput Load ConfigurationEnvironmental Monitoring SensorsHTTP/SSL NetworkTelnet/SSH Setting the IP address, subnet mask or gatewaySetting SSL access level Serial PortsSetting the HTTP authentication method Setting the data-rate for the serial portsUsers OutletsGroups Changing a user passwordAdding and Deleting group access Changing a user’s access privilege levelAdding and Deleting outlet access Adding and Deleting serial port accessSetting the filename for upload SNTPSNMP Testing the FTP upload configurationRestart Command Line InterfaceTools Logging InOperations Command Summary Administrative Command SummaryTo display the names of commands that you may execute Administrative Command Summary continuedTo reboot one or more outlets Operations CommandsRebooting outlets Turning outlets onDisplaying outlet status To display on/off status of one or more outletsDisplaying accessible groups Displaying accessible outletsTo display accessible outlets To display accessible groupsConnecting to a serial device Displaying accessible serial portsTo display accessible serial ports Displaying infeed statusStarting a new session Displaying the status of the Environmental MonitorTo display the status of the Environmental Monitor To start a new sessionCreating a user account Administration CommandsUser Administration To create a user accountSetting user access level privileges Changing a passwordTo change a password To set the access level privilege for a userAdding outlet access to a user Displaying the access privilege levelsTo display user access privilege levels To grant outlet access to a userAdding group access to a user Deleting outlet access for a userTo delete outlet access for a user To grant group access to a userTo display user outlet, group and serial port access Group AdministrationDisplaying user outlet, group and serial port access Creating a group nameTo add an outlet to a group Outlet AdministrationAdding an outlet to a group Deleting an outlet from a groupDisplaying outlet information Setting the outlet wakeup stateTo set the wakeup state To display outlet informationEnabling or disabling active signal checking for serial connections Serial Port AdministrationSetting the serial ports data-rate To enable or disable active signal checking for serial connectionsTo display system configuration information System AdministrationDisplaying system configuration information Creating a location descriptionDisplaying tower information Creating a descriptive tower nameTo create a tower name To display tower informationSetting the IP address TCP/IP AdministrationTo perform a warm boot Setting the subnet maskTo display network configuration information HTTP AdministrationDisplaying network configuration information To enable or disable HTTP supportTo set the HTTP authentication method Telnet AdministrationFTP Administration To enable or disable Telnet supportSetting the filename to be uploaded Setting the FTP PasswordTo set the FTP password Setting the filepath for the file to be uploadedDisplaying SNTP configuration information SNTP AdministrationSetting the SNTP server address To display SNTP configuration informationEnabling and Setting up SSH Support Enabling and Setting up SSL SupportSSL Technical Specifications SSH Technical SpecificationsSSL Technical Specifications SSL Command SummaryEnabling and Setting up SSL Support To enable or disable SSL supportSSH Technical Specifications SSH Command SummaryEnabling and Setting up SSH Support To enable or disable SSH supportSNMP SNMP Command SummaryEnabling and Setting up SNMP Support To enable SNMP supportSetting the Get/Set community strings To reset the trap destinationTo set the trap timer Setting the Trap community stringTower Status traps SNMP TrapsTrap Summary Infeed Status trapsTemperature/Humidity Sensor Status traps Outlet Status trapsEnvironmental Monitor Status traps Load trapsTemp Trap Temp trapsHumidity traps Humidity TrapEnabling or Disabling a Status trap Configuring Traps SNMP Trap Command SummaryTo Enable or Disable a Status trap To Enable or Disable a Change trap To Enable or Disable a Load trapSetting the Infeed Load limit To Enable or Disable the Temp trapSetting the Humidity sensor threshold limits Setting the Temperature sensor threshold limitsTo Enable or Disable the Humid trap To set the Temperature threshold limitsStatus Displaying trap configuration informationTo display trap information WebServer1U PLOADING F IRMWARE R ESETTING TO F ACTORY D EFAULTS5. Appendices T ECHNICAL S PECIFICATIONSTo reset to factory defaults from the command line Resetting to Factory DefaultsTo reset to factory defaults from the HTML interface To reset to factory defaults using the reset buttonPhysical Specifications Technical SpecificationsPower Ratings Models Europe/AsiaBranch Circuit Protection LED IndicatorsData Connections RS-232 portPage