MGE UPS Systems 30A user manual Installation, Positioning

Page 11

2.1 Positioning

Upsilon STS 30 - 60 - 100 - 160 - 250 A (cabinet 1400 mm high)

>250 mm

14

15

2. Installation

1 - Unclip the base panels 14 .

2 - Set the cabinet to a level position using the adjustable foot pads 15 .

3 - Put the base panels 14 back in place.

Important: correct ventilation requires at least 250 mm of free space behind the cabinet.

Upsilon STS 30 - 60 - 100 - 160 - 250 - 400 - 600 A (cabinet 1900 mm high)

>350 mm

1 - Unclip the base panels 14 .

2 - Set the cabinet to a level position using the adjustable foot pads 15 .

3 - Put the base panels 14 back in place.

Important: correct ventilation requires at least 350 mm of free space above the cabinet.

14

15

34020113EN/AA - Page 11

Image 11

Contents Upsilon STS 2 34020113EN/AA Introduction Document Using this documentForeword PictogramsContents Appendix Upsilon STS 30 60 100 160 250 a cabinet 1400 mm high PresentationUpsilon STS 30 60 100 160 250 a cabinet 1400 mm high Access to control and connectionsFunction buttons Man / machine interfaceOutput terminal block Relay communication cardJBus communication card Positioning InstallationPower connections Upsilon STS 30 to 250 a Input Phases + PEN Output L1 L2 L3 Upsilon STS 400 to 600 a Input Phases + PEN Output Connection of the emergency power off terminal block RS485 Connection of the communication cardsConnection of the Jbus communication card RS232Connection of the relay communication card Characteristics of the output contactsCharacteristics of the input contacts Shutdown Load is not supplied with powerOperation Start-upManual transfer to the alternate source Normal mode. Operation on preferred source S1Operation on the preferred source Automatic transfer to the alternate sourceManual transfer to an out-of-phase alternate source Main screen Display screensUpsilon STS customization Factory setting CustomizationCustomization of the relay communication card Inputs Factory settingSignals available on each contact Transfer to the manual bypass MaintenanceIdentification of anomalies Environment UPS recycling at the end of service lifeAppendix Simplified diagram of an installation Simplified diagramsUpsilon STS simplified diagram Glossary Connections Index