American Power Conversion 200/208 V, 10-30 KVA manual Select YES, Turn Load Off, Status views

Page 17

Operation – Navigation

Switch load OFF (disconnect the UPS output to the load equipment):

From the Main Menu, select Control and press ENTER

Use UP/DOWN key to navigate to Turn Load Off, and press ENTER

Select YES, Turn Load Off

Switch load ON:

From the Main Menu, select Control and press ENTER

Use UP/DOWN key to navigate to Turn Load On, and press ENTER

Select YES, Turn Load On

Switch into bypass:

From the Main Menu, select Control and press ENTER

Use UP/DOWN key to navigate to UPS into Bypass and press ENTER

Use UP/DOWN key to navigate to YES, UPS into bypass, and press ENTER

Switch out of bypass:

From the Main Menu, select Control and press ENTER

Select UPS out of Bypass and press ENTER

Use UP/DOWN key to navigate to YES, UPS out of Byp, and press ENTER

Status views

Select Status on the Main Menu to view the status on the following parameters

Control

Logging

Status

Display

Setup

Diags

 

Help

Main Menu

Voltage on all phases.

Utility voltage (V), bypass voltage (V), and output voltage (V) for each phase.

Current on all phases.

Utility current (A), bypass current (A), and output current (A) for each phase.

kVA and kW.

Apparent power (kVA) and real power (kW) generated by the UPS to the load.

990-2359A Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide

9

Image 17
Contents Operation Page Smart-UPSVT and XR Battery Enclosure10-30 kVA 200/208 Page Contents Appendix Options Page Symbols used in this guide General Safety InstructionsEnvironmental symbols General safetySafety General Safety Instructions Introduction Operation523mm Enclosures Smart-UPS VT Family Range352mm Enclosures Operation Modes Introduction DisplayStatus NavigationControl functions Basic display navigation principlesStatus views Select YES, Turn Load OffDate Clock set-upLogging TimeDisplay setup Alarm thresholdDiagnostics screen From the Display Setup Menu, select ContrastMain Menu Display messages Display Messages/TroubleshootingOperation Display Messages/Troubleshooting Display Message Meaning Corrective Action Front Panel removal Remove Battery Compartment Cover Battery Compartment Cover installation Front Panel installation Total-Power-Off Procedure Power application Restart ProcedureEnter Voltage confirmationTurn into mechanical bypass Mechanical BypassMechanical Bypass Lever Page Network Management Card with Environmental Monitor Network Management Card replacementBattery Module Battery ReplacementGeneral safety prior to module replacement Removal and installation of Battery Lock if applicable How to install a Battery Module Battery Module removal  Orderable parts How to Obtain Replacement PartsUPS Components and Options AppendixType label Serial number24kg Part number codingStabilizing Bracket User interface Foot print Options Extended Run Battery Enclosure XR Battery EnclosurePart number for Battery Module Part numbers for XR Battery EnclosuresAppendix Options Appendix Options Page 990-2359A