Operation – Navigation
Frequencies.
Utility frequency, bypass frequency and output frequency in Hertz (Hz).
Load and batteries.
Load: Percentage of the load in relation to the total UPS capacity.
Bat Voltage: shows either the positive or negative half of the battery voltage (the lower value of the two will appear).
Bat Cap: Percentage charge on the batteries in relation to the total battery capacity.
Runtime: The predicted runtime at the current load.
Batteries.
Bat AmpHr: Battery capacity, including both external and internal batteries.
UPS Temp: The highest external battery temperature.
Alarm thresholds.
Load: An alarm will be set when the load is above the threshold level.
Runtime: An alarm will be set when the runtime is below the threshold level.
Clock set-up
From the Setup screen on the Main Menu, you can change the date and the clock setting. From the Settings screen, select Clock, and press ENTER. A date and a time line will appear.
Control | Logging |
Status | Display |
Setup | Diags |
| Help |
Main Menu
Time.
The clock function is used to
Date
•To change the date, press ENTER (the day field will become active). Press the UP/DOWN arrow to select the desired date.
•To change the month and the year, follow the same procedures.
•Press ENTER to confirm the new settings, or ESC to cancel.
10 |