American Power Conversion 200/208 V, 10-30 KVA Network Management Card with Environmental Monitor

Network Management Card with

Environmental Monitor

The APC Network Management Card with Environmental Monitor (AP9619) is installed in the UPS as default. It is used for remote system control and monitoring, e-mail notifications etc.

SEE ALSO!

For configuration and use, refer to the separate user manual - Network Management Card with Environmental Monitor - shipped with the UPS.

Network Management Card replacement

	
	

Loosen the 2 torx screws (one each side of the card).

Carefully pull out the card. Reversed procedures for installation.

990-2359A Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide 27