American Power Conversion 10-30 KVA, 200/208 V manual Stabilizing Bracket

Appendix – UPS Components and Options

Stabilizing Bracket

Always install the Stabilizing Brackets on the 352mm Enclosure (shipped with the UPS) to enhance the stability of the Enclosure.

Attach the Stabilizing Bracket to the UPS Enclosure re-using the screws used to secure the UPS to the pallet during shipment.





Stabilizing

Bracket

If the Enclosure needs to be moved after Stabilizing Brackets have been attached to the Enclosure, the Stabilizing Brackets must be pushed up into their high position.

Loosen the two screws of both Stabilizing Brackets, and push the bracket up into the high position.

When the Enclosure has reached its new position, push the Bracket into its “down” position again, and tighten the screws.

WARNING!

For stability reasons, do not remove Stabilizing Brackets from 352mm Enclosures.

36 Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide 990-2359A