Mount the Redundant Switch in the rack
Connect your equipment
Installation
Use two people to lift the Redundant Switch.
Heavy
1.Slide the front rail segments attached to the Redundant Switch into the rear rail segments attached to the rack.
2.From the rear of the rack, insert and tighten the slide screws and nuts.
Do not connect laser printers through the
Redundant Switch
Caution
1.Use your server’s power cords to connect to the Redundant Switch.
2.Connect a communications cable
If there are not enough outlets to connect all your equipment, use a
Note
APC Redundant Switch: Installation and Operation Manual | 11 |