American Power Conversion Redundant Switch operation manual Warranty and Service

Page 29

Warranty and Service

Limited

APC warrants the Redundant Switch to be free from defects in

warranty

materials and workmanship for a period of two years from the

 

date of purchase. Its obligation under this warranty is limited to

 

repairing or replacing, at its own sole option, any such

 

defective products. This warranty does not apply to equipment

 

that has been damaged by accident, negligence, or

 

misapplication or has been altered or modified in any way. This

 

warranty applies only to the original purchaser.

Warranty

Except as provided herein, APC makes no warranties,

limitations

express or implied, including warranties of merchantability

 

and fitness for a particular purpose. Some jurisdictions do

 

not permit limitation or exclusion of implied warranties;

 

therefore, the aforesaid limitation(s) or exclusion(s) may not

 

apply to the purchaser.

Obtaining service

Except as provided above, in no event will APC be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of this product, even if advised of the possibility of such damage.

Specifically, APC is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. This warranty gives you specific legal rights and you may also have other rights, which vary according to jurisdiction.

To obtain support for problems with your Redundant Switch:

1.Note the serial number and date of purchase. The serial number is located on the back of the Redundant Switch.

2.Contact Customer Support at a phone number on the back cover of this document. A technician will try to help you solve the problem by phone.

3.If you must return the product, the technician will give you a return material authorization (RMA) number. If the warranty expired, you will be charged for repair or

APC Redundant Switch: Installation and Operation Manual

25

Image 29
Contents APC Redundant SwitchThis manual is available in English on the enclosed CD Contents Page Before You Begin Part Number Description Quantity Pre-Installation ProceduresVoltage Source Input Load Output Available ModelsModel SU043 Model SU045-1 SU042-4Do not remove this deviceInstallation Following example shows how to attach the bracket for See Appendix a Rack-Mount Supplement Installation To the front of the Redundant Switch, connect Use two people to lift the Redundant Switch Turn on the equipment and Redundant Switch Both UPSs must be the same sine-wave model ConfigurationRestart the computer on which PowerChute plus is Function LED Display Description OperationYou can use a remotely operated Emergency Power Off EPO LED Display Status of Source Function Select LED Indicator. The three green FunctionFunction Status LED Indicator. The green Function Status Problem Possible Cause Corrective Actions TroubleshootingContinuously for capability to carry a load and ability to Specification SpecificationsSU043 and SU044-1 SU045 Appendix a Rack-Mount Supplement Type of Rack Hole Type Hardware Required Except as provided herein, APC makes no warranties Warranty and ServiceExpress or implied, including warranties of merchantability Fitness for a particular purpose. Some jurisdictions doWarranty and Service Life-Support Policy Page Radio Frequency Interference USA APC Worldwide Customer Support