American Power Conversion Redundant Switch operation manual Life-Support Policy

Page 31

Life-Support Policy

General policy

American Power Conversion (APC) does not recommend the

 

use of any of its products in the following situations:

 

• In life-support applications where failure or malfunction

 

of the APC product can be reasonably expected to cause

 

failure of the life-support device or to affect significantly

 

its safety or effectiveness.

 

In direct patient care.

 

APC will not knowingly sell its products for use in such

 

applications unless it receives in writing assurances

 

satisfactory to APC that (a) the risks of injury or damage have

 

been minimized, (b) the customer assumes all such risks, and

 

(c) the liability of American Power Conversion is adequately

 

protected under the circumstances.

Examples of

The term life-support device includes but is not limited to

life-support

neonatal oxygen analyzers, nerve stimulators (whether used for

devices

anesthesia, pain relief, or other purposes), autotransfusion

 

devices, blood pumps, defibrillators, arrhythmia detectors and

 

alarms, pacemakers, hemodialysis systems, peritoneal dialysis

 

systems, neonatal ventilator incubators, ventilators (for adults

 

and infants), anesthesia ventilators, infusion pumps, and any

 

other devices designated as “critical” by the U.S. FDA.

 

Hospital-grade wiring devices and leakage current protection

 

may be ordered as options on many APC UPS systems. APC

 

does not claim that units with this modifications are certified or

 

listed as hospital-grade by APC or any other organization.

 

Therefore these units do not meet the requirements for use in

 

direct patient care.

APC Redundant Switch: Installation and Operation Manual

27

Image 31
Contents APC Redundant SwitchThis manual is available in English on the enclosed CD Contents Page Before You Begin Part Number Description Quantity Pre-Installation ProceduresVoltage Source Input Load Output Available ModelsModel SU043 Model SU045-1 SU042-4Do not remove this deviceInstallation Following example shows how to attach the bracket for See Appendix a Rack-Mount Supplement Installation To the front of the Redundant Switch, connect Use two people to lift the Redundant Switch Turn on the equipment and Redundant Switch Both UPSs must be the same sine-wave model ConfigurationRestart the computer on which PowerChute plus is Function LED Display Description OperationYou can use a remotely operated Emergency Power Off EPO Function Status LED Indicator. The green Function Status Function Select LED Indicator. The three green FunctionLED Display Status of Source Problem Possible Cause Corrective Actions TroubleshootingContinuously for capability to carry a load and ability to Specification SpecificationsSU043 and SU044-1 SU045 Appendix a Rack-Mount Supplement Type of Rack Hole Type Hardware Required Fitness for a particular purpose. Some jurisdictions do Warranty and ServiceExcept as provided herein, APC makes no warranties Express or implied, including warranties of merchantabilityWarranty and Service Life-Support Policy Page Radio Frequency Interference USA APC Worldwide Customer Support