American Power Conversion Redundant Switch operation manual Appendix a Rack-Mount Supplement

Page 27

Appendix A: Rack-Mount Supplement

Installation for

The Redundant Switch is provided with brackets for mounting

rack-mount

in standard 19 in.(46.5 cm.) rack.

units

Select a rack location with adequate air flow that is free from

 

 

excessive dust. Do not operate the Redundant Switch where

 

temperature or humidity are outside the limits listed under

 

“Specifications,” beginning on page 20.

APC Redundant Switch: Installation and Operation Manual

23

Image 27
Contents APC Redundant SwitchThis manual is available in English on the enclosed CD Contents Page Before You Begin Part Number Description Quantity Pre-Installation ProceduresVoltage Source Input Load Output Available ModelsModel SU043 Model SU045-1 SU042-4Do not remove this deviceInstallation Following example shows how to attach the bracket for See Appendix a Rack-Mount Supplement Installation To the front of the Redundant Switch, connect Use two people to lift the Redundant Switch Turn on the equipment and Redundant Switch Both UPSs must be the same sine-wave model ConfigurationRestart the computer on which PowerChute plus is Function LED Display Description OperationYou can use a remotely operated Emergency Power Off EPO Function Select LED Indicator. The three green Function Function Status LED Indicator. The green Function StatusLED Display Status of Source Problem Possible Cause Corrective Actions TroubleshootingContinuously for capability to carry a load and ability to Specification SpecificationsSU043 and SU044-1 SU045 Appendix a Rack-Mount Supplement Type of Rack Hole Type Hardware Required Fitness for a particular purpose. Some jurisdictions do Warranty and ServiceExcept as provided herein, APC makes no warranties Express or implied, including warranties of merchantabilityWarranty and Service Life-Support Policy Page Radio Frequency Interference USA APC Worldwide Customer Support