APC ACRD501 Compressor drive status ACRD500 and ACRP100 cooling units, Identification, Run hours

Compressor drive status (ACRD500 and ACRP100 cooling units)

View the following information about each cooling unit:

•Speed

•Power

•Voltage

•Current

•DC Link Voltage

•Heat Sink Temperature

•Control Card Temperature

•Warning Status

•Alarm Status

Identification

The Unit tab’s left navigation menu option Identification displays the following read-only information about each unit:

•Model Number

•Serial Number

•Controller Firmware

•Hardware Revision

•Date of Manufacture

You can also configure the following identification information:

•Unit ID—Assign the unit a number from 1 to 12. The Unit ID must be unique for each cooling unit within the cooling group.

•Name—Enter a name (up to 20 alphanumeric characters) for the unit.

•Location—Enter the location (up to 20 alphanumeric characters) of the unit.

Click Apply to save your changes.

Run hours

View the run hours of the unit components. To reset the run hours, select the unit components to set to zero and click Apply.