![](/images/new-backgrounds/1069220/69220103x1.webp)
Console
Use the options under Console on the left navigation menu to configure the following:
Option | Description |
| |
access | Choose one of the following: |
| • Disable: Disables all access to the control console. |
| • Enable Telnet (the default setting): Telnet transmits user names, passwords, and data |
| without encryption. |
| • Enable SSH v1/v2: Do not enable both versions 1 and 2 of Secure SHell (SSH) unless you |
| require that both be activated at the same time. (Security protocols use extensive processing |
| power.) |
| • Enable SSH v1 only: Secure SHell (SSH) version 1 transmits user names, passwords, and |
| data in encrypted form. There is little or no delay as you log on. |
| • Enable SSH v2 only: Secure SHell (SSH) version 2 transmits user names, passwords, and |
| data in encrypted form with somewhat more protection than version 1 from attempts to |
| intercept, forge, or alter data during transmission. There is a noticeable delay as you log on. |
| Identify the TCP/IP port used for communications with the cooling unit by Telnet and Secure |
| SHell (SSH). |
| • Telnet Port: The default is 23. |
| • SSH Port: The default is 22. |
| You can change the Port setting to the number of any unused port from 5000 to 32768 to |
| enhance the protection provided by User Name and Password settings. |
•For Telnet, you must use either a colon (:) or a space in the command line, according to the requirements of your Telnet client program, to specify the non-default port number. For
example, for a port number of 5000 and the cooling unit IP address of 152.214.12.114, your Telnet client requires one of the following commands:
telnet 152.214.12.114:5000 telnet 152.214.12.114 5000
•For SSH, see the documentation for your SSH client for the command line format required to specify a non-default port when starting SSH.
ssh | Enable or disable encryption algorithms (block ciphers) compatible with SSH version 1 or |
encryption | version 2 clients: |
SSH v1 algorithms:
•DES
•Blowfish: If your SSH v1 client cannot use Blowfish, which is always enabled, you must also enable DES.
SSH v2 algorithms:
•3DES: (enabled by default)
•Blowfish: (enabled by default)
•AES 128
•AES 256
Your SSH v2 client selects the enabled algorithm that provides the highest security. If your SSH client cannot use the default algorithms, you must enable an AES algorithm that it can use.
44 | InRow RC/RD/RP (600 mm) User’s Guide |
User’s Guide
Page
Contents
Web Interface
Administration Security
Administration Notification
Verifying Upgrades and Updates
Page
Features of the InRow RC/RD/RP 600 mm cooling unit
Initial setup
Introduction
Product Description
Access priority for logging on
Internal Management Features
Overview
Types of user accounts
How to Recover from a Lost Password
Watchdog Features
Display Interface LEDs
Remote access to the control console
How to Log On
Control Console
Local access to the control console
Main Screen
Example main screen
Information and status fields
Main screen status fields
Control Console Menus
Menu structure
Main menu
Device Manager option
Network option
Control Administrator and Device Manager access
System option
Supported Web browsers
Web Interface
URL address formats
Common browser error messages at log on
Error Message Browser Cause of the Error
Summary
Navigation tabs
Quick status
Help
Select a tab to perform a task
InRow RC/RD/RP 600 mm User’s Guide
Alarm status
Cooling Unit Operation
Home
Group
Setpoints
Configuration
Dehumid Deadband 2.0-10.0%
Unit
Detailed status
Identification
Compressor drive status ACRD500 and ACRP100 cooling units
Run hours
Service intervals
Air Filter-18 weeks Humidifier-26 weeks
Condensate Pump-52 weeks
Thresholds
Configuration
Logs
Events
Log
Reverse lookup
Graphing
Data
Interval
Rotation
Hours specified as Delay hours between Uploads
Parameter Description
Syslog
Setting Definition
Servers
Settings
Test
How to use FTP or SCP to retrieve the log files
Queries Modbus requests and Snmp GETs
Administration Security
Setting user access
Local Users
Permission levels
Authentication
Remote Users
InRow RC/RD/RP 600 mm User’s Guide
Configuring the Radius Server
Summary of the configuration procedure
Configuring a Radius server on UNIX, with shadow passwords
Inactivity Timeout
Supported Radius servers
Administration Network
TCP/IP and communication settings
TCP/IP settings
Setting
Configuration page1
Dhcp
Dhcp response options
Boot mode transition. Tag 2, Len 1, Data 1/2
APC cookie. Tag 1, Len 4, Data 1APC
Port speed
DNS AdminstrationNetworkDNSservers
Query Type Selected Query Question to Use
Web
Enabled
Option Description
On this link to view the certificate’s contents
Status
Console
AES
Is loaded
Snmp
Option Description
FTP server
Related Topics
Administration Notification
Configuring event actions
Event Actions
Types of notification
InRow RC/RD/RP 600 mm User’s Guide
InRow RC/RD/RP 600 mm User’s Guide
Active, Automatic, Direct Notification
Mail notification
Setting Description
Smtp
Snmp traps
Information about the Cooling Unit
Administration General Options
Date & time
User configuration file ini
Reset the interface
Unit preference
Action Definition
Serial Modbus
Quick links
About
APC Device IP Configuration Wizard
Capabilities, Requirements, and Installation
Use the Wizard to configure basic TCP/IP settings
Installation
Configure the basic TCP/IP settings remotely
Use the Wizard
Launch the Wizard
Select Remotely over the network, and click Next
Configure or reconfigure the TCP/IP settings locally
Select Locally through the serial port, and click Next
How to Export Configuration Settings
Summary of the procedure
Contents of the .ini file
Retrieving and Exporting the .ini File
Detailed procedures
Exporting the file to multiple cooling units. T
Upload Event and Error Messages
Event and its error messages
Errors generated by overridden values
Event text Description
How to Upgrade Firmware
File Transfers
Benefits of upgrading firmware
Firmware files
Firmware file transfer methods
Use FTP or SCP to upgrade one cooling unit
\cd\apc
Ftp open 150.250.6.10
Ftp put apchw03aosxxx.bin
Upgrade multiple cooling units
Use Xmodem to upgrade one cooling unit
InRow RC/RD/RP 600 mm User’s Guide
Last transfer result codes
Verifying Upgrades and Updates
Code Description
Page
Page
990-2937A
2009