APC ACRP100 manual Rotation, Parameter Description, Hours specified as Delay hours between Uploads

Page 34

Rotation

Use this option to set up a password-protected data log repository on a specified FTP server. Enabling rotation causes a copy of any previously unsaved entries in the data log to be appended to the file you specify by name and location. Updates to this file occur either at the upload interval that you specify, in hours, or when the data log has reached its maximum size (if the maximum size is reached before the upload interval expires).

Parameter	Description

Last Upload Result	Indicates whether the last upload of the data file to the FTP server succeeded or
	failed, or displays "None Available."

Data Log Rotation	Enable or disable (the default) data log rotation.

FTP Server	The location (IP address or host name) of the FTP server where the data repository
	file is stored.

User Name	The user name required to send data to the repository file. This user must also be
	configured to have read and write access to the data repository file and the
	directory (folder) in which it is stored.

Password	The password required to send data to the repository file.

File Path	The path to the repository file.

File Name	The name of the repository ASCII text file.

Delay hours	The number of hours between uploads of data to the specified file.
between Uploads

Retry Delay	The time that the system waits before retrying an upload after a failed attempt. You
	can specify that the upload will be retried repeatedly until it succeeds or you can
	limit the number of retries. If you specify a limited number of retries and the
	upload has been retried unsuccessfully the specified number of times (Number of
	Retries), the scheduled upload is skipped, and the system waits the number of
	hours specified as Delay hours between Uploads.

Number of Retries	The number of times the upload will be attempted after an initial failure.

To initiate the initial upload of data to the repository file immediately, click Upload Now!

26	InRow RC/RD/RP (600 mm) User’s Guide

Image 34

Contents

User’s Guide Page Contents Web Interface Administration Security Administration Notification Verifying Upgrades and Updates Page Introduction Features of the InRow RC/RD/RP 600 mm cooling unitInitial setup Product DescriptionAccess priority for logging on Internal Management FeaturesOverview Types of user accounts How to Recover from a Lost Password Watchdog Features Display Interface LEDsRemote access to the control console How to Log OnControl Console Local access to the control console Main Screen Example main screenInformation and status fields Main screen status fields Main menu Control Console MenusMenu structure Device Manager optionNetwork option Control Administrator and Device Manager accessSystem option Supported Web browsers Web InterfaceURL address formats Common browser error messages at log on Error Message Browser Cause of the ErrorQuick status SummaryNavigation tabs HelpSelect a tab to perform a task InRow RC/RD/RP 600 mm User’s Guide Home Alarm statusCooling Unit Operation GroupSetpoints ConfigurationDehumid Deadband 2.0-10.0% Unit Detailed statusIdentification Compressor drive status ACRD500 and ACRP100 cooling unitsRun hours Condensate Pump-52 weeks Service intervalsAir Filter-18 weeks Humidifier-26 weeks ThresholdsConfiguration Log LogsEvents Reverse lookupGraphing DataInterval Rotation Hours specified as Delay hours between UploadsParameter Description Syslog Setting DefinitionServers Settings Test How to use FTP or SCP to retrieve the log files Queries Modbus requests and Snmp GETs Local Users Administration SecuritySetting user access Permission levelsAuthentication Remote UsersInRow RC/RD/RP 600 mm User’s Guide Configuring the Radius Server Summary of the configuration procedureConfiguring a Radius server on UNIX, with shadow passwords Inactivity TimeoutSupported Radius servers TCP/IP settings Administration NetworkTCP/IP and communication settings SettingConfiguration page1 DhcpDhcp response options Boot mode transition. Tag 2, Len 1, Data 1/2APC cookie. Tag 1, Len 4, Data 1APC Port speed DNS AdminstrationNetworkDNSservers Query Type Selected Query Question to UseWeb EnabledOption Description On this link to view the certificate’s contents StatusConsole AESIs loaded Snmp Option Description FTP server Related TopicsEvent Actions Administration NotificationConfiguring event actions Types of notificationInRow RC/RD/RP 600 mm User’s Guide InRow RC/RD/RP 600 mm User’s Guide Active, Automatic, Direct Notification Mail notificationSetting Description SmtpSnmp traps Information about the Cooling Unit Administration General OptionsDate & time Unit preference User configuration file iniReset the interface Action DefinitionSerial Modbus Quick linksAbout Use the Wizard to configure basic TCP/IP settings APC Device IP Configuration WizardCapabilities, Requirements, and Installation InstallationLaunch the Wizard Configure the basic TCP/IP settings remotelyUse the Wizard Select Remotely over the network, and click NextConfigure or reconfigure the TCP/IP settings locally Select Locally through the serial port, and click NextContents of the .ini file How to Export Configuration SettingsSummary of the procedure Retrieving and Exporting the .ini FileDetailed procedures Exporting the file to multiple cooling units. T Errors generated by overridden values Upload Event and Error MessagesEvent and its error messages Event text DescriptionBenefits of upgrading firmware How to Upgrade FirmwareFile Transfers Firmware filesFirmware file transfer methods Ftp open 150.250.6.10 Use FTP or SCP to upgrade one cooling unit\cd\apc Ftp put apchw03aosxxx.binUpgrade multiple cooling units Use Xmodem to upgrade one cooling unitInRow RC/RD/RP 600 mm User’s Guide Last transfer result codes Verifying Upgrades and UpdatesCode Description Page Page 990-2937A 2009

Related manuals

Manual 50 pages 52.8 Kb