![](/images/new-backgrounds/1069220/6922017x1.webp)
Introduction
Product Description
Features of the InRow RC/RD/RP (600 mm) cooling unit
The American Power Conversion (APC®) InRow RC/RD/RP (600 mm) cooling unit is a modular air conditioning unit that is available in either a direct expansion (DX) model (ACRD500 series or ACRP100 series) or a chilled water (CW) model (ACRC500 series or ACRP500 series). It is the width of a standard enclosure (600 mm), and can be placed in a
•Group control
•Temperature monitoring
•Remote shutdown
•Output contact monitoring
•Event log accessible by Telnet, FTP, SSH, SCP, serial connection, the display interface, or a Web browser
•SNMP traps and
•Syslog events sent to configured Syslog servers
•Security protocols for authentication and encryption
Initial setup
You must define the following three TCP/IP settings for the cooling unit before it can operate on the network:
•IP address of the cooling unit
•Subnet mask
•IP address of the default gateway
Note: Never use the loopback address (127.0.0.1) as the default gateway address for the cooling unit. Doing so will disable the unit and will require you to reset TCP/IP settings to their defaults using a local serial login.
To use a DHCP server to configure the TCP/IP settings for a cooling unit, see “TCP/ IP settings” on page 37.
To configure the TCP/IP settings, see the Installation Manual for your cooling unit, provided in printed form and in PDF on either the Utility CD or on the APC Web site, www.apc.com.
InRow RC/RD/RP (600 mm) User’s Guide | 1 |