![](/images/new-backgrounds/1069220/69220121x1.webp)
SMTP
Setting | Description | |
|
| |
Local | The IP address (or if DNS is configured, the DNS name) of the local SMTP server. | |
SMTP | Note: This definition is required only when SMTP Server is set to Local | |
Server | ||
when | ||
| ||
| page 53. | |
|
| |
From | The contents of the From field in the format user@ [IP_address] (if an IP address is | |
Address | specified as Local SMTP Server) or user@domain.com (if DNS is configured and the | |
| DNS name is specified as Local SMTP Server) in the | |
| cooling unit. |
Note: The local SMTP server’s configuration may require that you use a valid user account on the server for this setting. See the server’s documentation for more information.
Setting | Description |
|
|
To Address | Defines the user and domain names of the recipient. To use |
| |
| myacct100@skytel.com). The pager gateway will generate the page. |
| You can bypass the DNS lookup of the mail server’s IP address by using the IP address |
| in brackets instead of the |
| jsmith@[xxx.xxx.x.xxx] instead of jsmith@company.com. This is useful when DNS |
| lookups are not working correctly. |
| Note: The recipient’s pager must be able to use |
|
|
Enables (by default) or disables sending | |
Generation |
|
SMTP Server | Selects one of the following methods for routing |
| • Local: Through the SMTP server of the cooling unit (the recommended setting). This |
| option ensures that the |
| and, if necessary, is retried several times. Also do one of the following: |
| • Enable forwarding at the cooling unit’s SMTP server so that it can route |
| external SMTP servers. Typically, SMTP servers are not configured to forward e- |
| mail. Always check with the administrator of your SMTP server before changing |
| its configuration to allow forwarding. |
| • Set up a special |
| mail account. |
| • Recipient: Directly to the recipient’s SMTP server. On a busy remote SMTP server, |
| the |
| cooling unit tries to send the |
| When the recipient uses the cooling unit’s SMTP server, this setting has no effect. |
|
|
Format | Select Long or Short. The Long format contains Name, Location, Contact, IP |
| address, serial number of the device, date, time, event code, and event description. The |
| Short format provides only the event description. |
|
|
InRow RC/RD/RP (600 mm) User’s Guide | 53 |