American Power Conversion 2200XLT Replacing the Battery, Storage Conditions, Extended storage

Storage

Storage Conditions

Store the UPS covered and upright in a cool, dry location, with its battery fully charged. Before storing, charge the UPS for at least two hours. Remove any accessories in the accessory slot and disconnect any cables connected to the computer interface port to avoid unnecessarily draining the battery.

Extended storage

At -15 to +30 °C (+5 to +86 °F), charge the UPS’s battery every six months.

At +30 to +45 °C (+86 to +113 °F), charge the UPS’s battery every three months.

Replacing the Battery

This UPS has an easy to replace hot-swappable battery. Battery replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and loads on for the following procedure. See your dealer or call the number listed under APC Contact Information, page 19, for information on replacement battery cartridges.

Note:

Please read the cautions in the Safety section at the beginning of this User’s Manual.

Once the battery is disconnected, the loads are not protected from power outages.

Model Number	Replacement Battery Cartridge (RBC) #
SU1400XLTNET	RBC 11
SU2200XLTNET	RBC 11
SU3000TNET	RBC 11
SU5000T	RBC 12
SU1400RMXLTNET	RBC 11
SU2200RMXLTNET	RBC 11
SU3000RMT3U	RBC 12
SU5000RMT5U	RBC 12

11 990-7031C, Revision 4 12/99