Agilent Technologies 66332A, 6634B, 6633B, 6632B Status Commands, STATusPRESet, STATusOPERation?

Page 61

Language Dictionary - 4

Status Commands

Status commands program the dc source status registers. The dc source has three groups of status registers; Operation, Questionable, and Standard Event. The Standard Event group is programmed with Common commands as described later in this section. The Operation and Questionable status groups each consist of the Condition, Enable, and Event registers and the NTR and PTR filters. Chapter 3 under "Programming the Status Registers" explains how to read specific register bits and use the information they return.

Common commands also perform status functions. The following common commands are discussed in

this section: *CLS *ESE *SR? *OPC *PSC *SRE *STB *WAI.

STATus:PRESet

This command sets all defined bits in the Status Subsystem PTR registers and clears all bits in the subsytem NTR and Enable registers.

Command Syntax

STATus:PRESet

Parameters

None

Examples

STAT:PRES STATUS:PRESET

Bit Position

Bit Name

Bit Weight

Table 4-4. Bit Configuration of Operation Status Registers

15–12

11

10

9

8

7-6

5

not

CC-

CC+

not

CV

not

WTG

used

 

 

used

 

used

 

 

2048

1024

 

256

 

32

4-1

not

used

0

CAL

1

CAL = The dc source is computing new calibration constants.

WTG = The dc source is waiting for a trigger.

CV = The dc source is operating in constant voltage mode.

CC+ = The dc source is operating in constant current mode.

CC = The dc source is operating in negative constant current mode.

STATus:OPERation?

This query returns the value of the Operation Event register. The Event register is a read-only register which holds (latches) all events that are passed by the Operation NTR and/or PTR filter. Reading the Operation Event register clears it.

Query Syntax

STATus:OPERtion[:EVENt]?

Parameters

None

 

Returned Parameters

<NR1>(Register Value)

 

Examples

STAT:OPER?

STATUS:OPERATIONAL:EVENT?

Related Commands

*CLS STAT:OPER:NTR STAT:OPER:PTR

STATus:OPERation:CONDition?

This query returns the value of the Operation Condition register. That is a read-only register which holds the real-time (unlatched) operational status of the dc source .

Query Syntax

STATus:OPERation:CONDition?

Parameters

None

 

Examples

STAT:OPER:COND?

STATUS:OPERATION:CONDITION?

Returned Parameters

<NR1> (register value)

 

61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Programming Guide Printing History Safety GuidelinesTable of Contents Internally Triggered Measurements Language DictionaryOutput Commands Scpi Conformance Information Error MessagesCompatibility Language Example ProgramsDocumentation Summary About this GuideGpib References External ReferencesScpi References Downloading and Installing the Driver VXIplug&play Power Products Instrument DriversSupported Applications System RequirementsGpib Capabilities of the DC Source Accessing Online HelpRS-232 Capabilities of the DC Source Gpib AddressRS-232 Programming Example RS-232 Flow ControlBaud Rate Introduction to Scpi RS-232 TroubleshootingConventions Used in This Guide Boldface fontMultiple Commands in a Message Types of Scpi CommandsUsing Queries Including Common CommandsTypes of Scpi Messages Moving Among SubsystemsMessage Unit Query IndicatorHeaders Message Unit SeparatorNumerical Data Formats Scpi Data FormatsSuffixes and Multipliers Response Data TypesUsing Device Clear Scpi Command CompletionPage Introduction Power-on InitializationProgramming the Output Enabling the OutputOutput Current Output VoltageMaximum Voltage Maximum CurrentTriggering Output Changes Setting the Voltage or Current Trigger LevelsScpi Triggering Nomenclature Output Trigger System ModelGenerating Triggers Initiating the Output Trigger SystemVoltage and Current Measurements Making MeasurementsDC Measurements Current Ranges RMS Measurements Agilent 66312A, 66332A OnlyMeasurement Trigger System Model Internally Triggered MeasurementsSequence Form Alias SEQuence2 ACQuire BUS Generating Measurement Triggers Agilent 66312A, 66332A OnlyTrigger Commands Used to Measure Output Pulses Current Detector Measuring Output Pulses Agilent 66312A, 66332A OnlyPulse Measurement Queries Varying the Voltage or Current Sampling Rate Controlling Measurement SamplesMultiple Measurements Agilent 66312A, 66332A Only Pre-event and Post-event Triggering Pulse Measurement Example Agilent 66312A, 66332A onlyOption Base Programming the Status Registers Power-On ConditionsOperation Status Group Standard Event Status Group Questionable Status GroupStatus Byte Register Servicing Operation Status and Questionable Status Events Determining the Cause of a Service InterruptMSS Bit RQS BitMonitoring Both Phases of a Status Transition Inhibit/Fault IndicatorDiscrete Fault Indicator DFI Remote Inhibit RIBit Weight Using the Inhibit/Fault Port as a Digital I/ODFI Programming Example PinPage Language Dictionary Subsystem CommandsSubsystem Commands Syntax ALC DFISubsystem Commands Syntax Common Commands Syntax Common CommandsProgramming Parameters Output Programming ParametersCALibrateCURRent Calibration CommandsCALibrateCURRentNEGative CALibrateCURRentMEASureLOWRangeCommand Syntax CALibrateSAVE Parameters None Examples CALibratePASSwordCALibrateDATA CALibrateLEVelCALibrateVOLTage CALibrateSTATeCALibrateVOLTagePROTection Query Syntax CALibrateSTATe?MEASureARRayCURRent? FETChARRayCURRent? Measurement CommandsMEASureARRayVOLTage? FETChARRayVOLTage? Query SyntaxMEASureCURRentACDC? FETChCURRentACDC? MEASureCURRent? FETChCURRent?MEASureCURRentHIGH? FETChCURRentHIGH? FETChCURRent? applies to Agilent 66312A, 66332A OnlyMEASureCURRentMAXimum? FETChCURRent MAXimum? MEASureCURRentLOW? FETChCURRentLOW?MEASureCURRentMINimum? FETChCURRentMINimum? MEASureVOLTageACDC? FETChVOLTageACDC? MEASureVOLTage? FETChVOLTage?MEASureVOLTageHIGH? FETChVOLTageHIGH? FETChVOLTage? applies to Agilent 66312A, 66332A OnlyMEASureVOLTageMAXimum? FETChVOLTageMAXimum? MEASureVOLTageLOW? FETChVOLTageLOW?MEASureVOLTageMINimum? FETChVOLTageMINimum? SENSeCURRentDETector SENSeCURRentRANGeUnit a amperes *RST Value MAX high range Returned Parameters NR3SENSeSWEepOFFSetPOINts SENSeFUNCtionSENSeSWEepPOINts SENSeSWEepTINTervalHANNing SENSeWINDowRECTangular Returned Parameters CRDOUTPut Output CommandsOUTPutDFI OUTPutDFISOURceOUTPutPONSTATe OUTPutPROTectionDELayOUTPutPROTectionCLEar OUTPutRELayPOLarity OUTPutRELayOUTPutRIMODE Query Syntax OUTPputRELayPOLarity?SOURceCURRent Default SuffixSOURceCURRentTRIGger SOURceCURRentPROTectionSTATeSOURceDIGitalFUNCtion SOURceDIGitalDATASOURceVOLTage Query Syntax SOURceDIGitalDATA?SOURceVOLTageTRIGger SOURceVOLTageALCBANDwidth? SOURceVOLTageALCBWIDth?SOURceVOLTagePROTection Agilent 66332A, 6631B, 6632B, 6633B and 6634B OnlySTATusPRESet Status CommandsSTATusOPERation? STATusOPERationCONDition?Query Syntax STATusOPERationENABle? STATusOPERationENABleParameters Preset Value STATusOPERationNTR STATusOPERationPTRSTATusQUEStionable? STATusQUEStionableENABleSTATusQUEStionableCONDition? STATusQUEStionableNTR STATusQUEStionablePTR Command Syntax *CLS Parameters NoneCLS STATQUESNTR?STATQUESPTR?ESE Bit Configuration of Standard Event Status Enable RegisterESR? OPCSRE PSCPSC on ExampleSTB? Bit Configuration of Status Byte RegisterWAI NR1 register binary valueDISPlay System CommandsDISPlayMODE DISPlayTEXTSYSTemLANGuage SYSTemERRor?SYSTemVERSion? Parameters none Returned Parameters NR2SYSTemREMote SYSTemLOCalSYSTemRWLock IDN?OPT? Command Syntax RCL NRf Parameters ExampleRCL RSTCommand Syntax SAV NRf Parameters Example RST SettingsSAV TST?ABORt Trigger CommandsINITiateSEQuence INITiateNAME INITiateCONTinuousSEQuence1 INITiateCONTinuousNAMETRIGgerSOURce TRIGgerTRIGgerSEQuence2 TRIGgerACQuire Abor Currtrig Init *TRG VolttrigTRIGgerSEQuence2COUNtVOLTage TRIGgerACQuireCOUNtVOLTage TRIGgerSEQuence2COUNtCURRent TRIGgerACQuireCOUNtCURRentParameters RST Value Examples TRIGSEQ2COUNCURR 5 TrigacqcouncurrTRIGSEQ2HYSTCURR TRIGSEQ2LEVVOLT TRIGSEQ2HYSTVOLT TRIGSEQ2LEVCURRTRIGgerSEQuence2LEVelVOLTage TRIGgerACQuireLEVelVOLTage TRIGgerSEQuence2LEVelCURRent TRIGgerACQuireLEVelCURRentTRIGSEQ2LEVVOLT TRIGSEQ2HYSTCURR TRIGSEQ2LEVCURR TRIGSEQ2HYSTVOLTTRIGgerSEQuence2SLOPeVOLTage TRIGgerACQuireSLOPeVOLTage TRIGgerSEQuence2SLOPeCURRent TRIGgerACQuireSLOPeCURRentTRIGSEQ2SLOPVOLT TRIGgerSEQuence2SOURce TRIGgerACQuireSOURce Parameters None Related CommandsTRIGgerSEQuence1DEFine TRIGgerSEQuence2DEFine TRGPage Non-SCPI Commands Scpi Confirmed CommandsScpi Version Page Command Setting Table B-1. COMPatibility Power-on Settings CommandERR? FAULT? ID? IOUT? Table B-2. COMPatibility Commands CompatibilitySimilar Scpi Command ASTS? CLRTable B-2. COMPatibility Commands Description Similar Scpi Compatibility CommandCompatibility Description Command Table B-2. COMPatibility CommandsThese commands determine the conditions that will set bits ErrorRQS ERR RDY Norm Fast INH ERR UNR +CCFAU Page Bit Set Error Number Error Code Error Type Error Number ListTable C-1. Error Numbers Error Number Page Types of DOS Drivers Assigning the Gpib Address in ProgramsAgilent 82335A Driver National Instruments Gpib DriverBasic Controllers Error HandlingExample Programs D Call IBCLRPS% Example 2. IBM Controller Using National InterfaceCODES$=*CLS Option Base Example 3. Controller Using BasicIndex 100 IndexScpi 101102 Manual Updates
Related manuals
Manual 82 pages 25.5 Kb Manual 83 pages 60.43 Kb

6613C, 66312A, 6631B, 6611C, 6614C specifications

Agilent Technologies, a leader in electronic test and measurement solutions, offers a range of power supplies designed to meet various application needs. Notable models include the 6632B, 6634B, 66332A, 6633B, and 6612C. Each of these units provides unique features and technologies that cater to researchers, engineers, and technicians in the industry.

The Agilent 6632B is a single-output DC power supply that delivers up to 30V and 3A. It is known for its excellent load regulation and low noise, making it ideal for sensitive electronic testing. The model includes built-in voltage and current measurement capabilities, allowing users to monitor output conditions in real time. The 6632B is commonly used in laboratory environments, educational institutions, and manufacturing lines.

Moving to the 6634B, this model offers dual-output capabilities with a maximum output of 30V and 6A. This versatility enables simultaneous powering of two different devices or circuit sections. It also features parallel and series operation options, allowing users to create a custom power supply configuration for specific applications. With a programmable interface, the 6634B simplifies test automation, ensuring efficiency in extensive testing scenarios.

The Agilent 66332A stands out with its precision and high performance. This power supply provides three outputs—two programmable and one fixed—yielding flexible power configurations. Its intuitive user interface allows easy adjustment of voltage and current settings. The device is equipped with extensive protection features to safeguard both the power supply and the connected load against faults. It is an excellent choice for complex testing setups that require reliable power.

The 6633B model offers a high-performance power supply with dual outputs, similar to the 6634B but with enhanced specifications. It can provide up to 40V and 2A per channel, delivering precision for demanding applications. This model is particularly suited for industries focused on high-reliability applications, such as telecommunications and aerospace.

Lastly, the Agilent 6612C is a compact and lightweight power supply providing single-output up to 60V and 2A. This model is designed for simplicity and ease of use, making it an excellent choice for portable applications. The 6612C’s unique characteristics include a compact design and user-friendly controls, which facilitate operation in field settings.

In summary, Agilent Technologies’ power supply models—6632B, 6634B, 66332A, 6633B, and 6612C—offer an array of features that cater to a wide range of testing and research needs, ensuring reliable power delivery in various contexts.
Top Page Image Contents