Changing the Forms Tear-Off Setting
Note: The default setting for Forms
To change the Forms
1Press SHIFT (2) + SEL (1).
2Press GROUP (3) repeatedly until the Rear Feed or Bottom Feed group shows in the first column of the printed line, depending on which paper feed you are using,
3Press ITEM (4) repeatedly until Form
Rear Feed | Form | Off |
4Press SET (5) until the time interval you wish to select appears in the third column:
Rear Feed | Form | 1 Sec |
5Press SHIFT (2) + SEL (1) to exit Menu Mode and save the setting.
Manual Forms Tear Off
If you don’t wish to engage the Forms
•
•
up to the tear off position manually by pressing TEAR (5).
Paper Park
Important!
Never park labels!
Paper park allows you to switch to
When you wish to print single sheets, simply press PARK (6) to retract the continuous form paper from the paper path, then lift the sheet guide, load the sheet and send the print job.