Note: The movement of the left tractor (as viewed from the front of the printer) is restricted to ensure that the paper covers the paper out sensor.
5You will find reference marks (1 in illustration below) on the printer for the two most common paper sizes:
ML490:ML491:
6Move the left tractor to the position to match your paper size and push back on the lever to lock it in place, then move the right tractor to fit the width of the paper.
7Open the tractor covers and place continuous forms paper on the first two pins of either tractor, then close the left tractor cover.
Important!
You must keep the number of paper holes engaged on either pin the same. If you don’t the paper will jam.