Oki 490 manual Entering and Exiting Menu Mode, Resetting the Menu to the Factory Defaults

Page 27

Entering and Exiting Menu Mode

To enter or exit the Menu Mode, hold SHIFT while pressing

SEL.

Resetting the Menu to the Factory Defaults

Note: Please print the current Menu Mode settings before you reset or change them. This is the only way to have a record of the settings.

To reset the Menu to the standard settings (factory defaults):

1Turn the printer off.

2Press SEL + LF while turning the printer on.

Printing the Menu Settings

Printing the Current Menu Settings

1Make sure paper is loaded in the printer.

2Press and hold SHIFT, then press SEL to enter the Menu Mode.

3Press PRINT (PARK key).

Printing All Menu Settings

To print out a listing of the settings for all menu items, regardless of the emulation selected or the accessories installed:

1Make sure paper is loaded in the printer.

2Press and hold SHIFT, then press SEL to enter the Menu Mode.

3Press and hold SHIFT, then press PRINT QUALITY.

Menu Mode 27

Image 27

Contents User’s Guide Mailing Address Safety Microline 490/491 User’s Guide Contents Troubleshooting Printer Features IntroductionOki Data on the Internet Internet Support Helpful HintsSaving Money Forms Tear-Off Saving TimeTurning the Platen Knob Controlling Access to the PrinterOperation Tips Top of Form TOFParts Identification Rear Feed Continuous Forms Using Your PrinterParts Identification Top Feed Single Sheets Top of Form TOF and Forms Tear-Off Top of Form TOFDetermining if Forms Tear-Off is Off or On Forms Tear-Off OFF Default Setting Setting Top of Form TOFForms Tear-Off Set to on Temporarily Changing the Top of Form Position Resetting Top of Form to the Factory DefaultPotential Problems with Software Packages Forms Tear-Off FeatureChanging the Forms Tear-Off Setting Paper ParkManual Forms Tear Off Continuous Forms toSingle Sheets Changing Paper PathsSingle Sheets toContinuous Forms Printhead Gap Print Quality Typefaces LQ Mode Character Pitch Printer Reset EmulationsChanging Emulations Menu Mode Keys Menu ModeEntering and Exiting Menu Mode Resetting the Menu to the Factory DefaultsPrinting the Menu Settings Changing the Menu Settings Group Settings Defaults are set in bold italic Menu Settings Table13.6 500 ms, 1 sec, 2 sec DEFAULT, Mode 1, Mode Invalid, Valid Menu Settings Table Explanations of Menu Items Use this to switch character sets to IBM Set Selects the printer command set emulation you want to engage Sets the signal on pin 18 to +5 volts or open Choose the quality and typeface of printing Change to Double for double width and height printing Replacing the Ribbon Cartridge MaintenancePrinthead may be HOT Rear Feed Loading PaperCareful Open the tractor covers Microline 490/491 User’s Guide Maintenance Loading Rear Feed Paper from the Front of the Printer ML490ML491 Microline 490/491 User’s Guide Maintenance Top Feed Single Sheets Maintenance Rear-Feed Paper Jams Clearing Paper JamsRear-Feed, Repeating Paper Jams Microline 490/491 User’s Guide Single-Sheet Paper Jams Cleaning the Housing General Information TroubleshootingSolution Problems / SolutionsSolutions Ink smears on the paper when I print narrow columns There are dots missing in my printouts Printer needs paper. The Alarm is not on. I can’t load paper Purchasing Parts & Accessories Appendix a Parts & AccessoriesPart Number Replacement PartsOption Part Number AccessoriesAppendix B Printer Control Codes Epson LQ CommandsDEL Enabled On DC3 Carriage Return Character Pitch, Select 10 cpi ESC % H IBM CommandsESC Q $ Appendix C Specifications Characters per Line cpl Graphics ResolutionEmulations co-resident Print SpeedResident Fonts Bar CodesResident Typefaces Paper Specifications ML490 Paper Specifications ML491 Physical Specifications Environmental RequirementsElectrical Requirements Appendix D Installation LocationUnpack Microline 490/491 User’s Guide Installation Install the Ribbon Cartridge Power Connection Computer ConnectionsParallel LPT Ieee USB Specification 1.1 Compliant Font Sample Test Testing the PrinterRolling Ascii Test Printer Drivers Hexadecimal Dump ModeLoading the OKI Driver Using a Compatible DriverIndex IBM Index Tear