Orion Car Audio CO3002, CO6002 owner manual Introduction, WHAT’S in the BOX, Practice Safe Sound

INTRODUCTION

Thank you for your purchase of a Orion Cobalt power amplifier. Each Orion Cobalt amplifier is designed to be the leader in its class offering the most power, advanced features, and extreme ease of use. In high-end sound systems or high SPL systems, Orion Cobalt amplifiers will give you years of trouble-free performance.

●CO3002 - 150 Watt - two-channel Class A/B amplifier with built-in fully variable high and low-pass crossover. The CO3002 is capable of one-channel operation with a maxi- mum power of 300 W into 4 ohms.

●CO6002 - 300 Watt - two-channel Class A/B amplifier with built-in fully variable high and low-pass crossover. The CO6002 is capable of one-channel operation with a maxi- mum power of 600 Watts into 4 ohms.

The installation of all Orion Cobalt components will determine the overall performance result. Improper installation will not only limit the performance of your Orion Cobalt system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and com- ponent reliability, please refer to your authorized dealer for installation assistance or advice. If you decide to perform the installation yourself, be sure to read the entire manual before begin- ning the installation.

WHAT’S IN THE BOX

●(1) Amplifier

●(4) #8 self-tapping black Phillips head pan head screws

●(1) Amplifier installation and operation manual

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure.

Model:	__________________________________________________
Serial Number:	__________________________________________________
Date of Purchase:	__________________________________________________

2 © 2008 directed electronics—all rights reserved