Epson TM-U375 user manual Grounding the Printer

Page 21

Grounding the Printer

When you use the printer as a single unit (not connected to an intelligent module), you need to ground your printer. (Intelligent module connection is available for the TM-U375 only.)

Recommended wire is described below.
Thickness of wire	: AWG18	or equivalent
Diameter of terminal to be attached :		3.2

1.Make sure that the printer is turned off.

2.Connect the ground wire to the ground connector (marked FG) on the bottom of the printer with the screw provided on the printer. Alternatively, another screw located beside the power connector on the TM-U375P can be used to connect the ground wire.

TM-U375

Setting Up the Printer 1-11

Image 21

Contents TM-U375 Control Panel Printer Part NamesPage EMC and Safety Standards Applied CE Marking Gereäuschpegel About This Manual Setting up and Using FeaturesReference Contents Reference Information TroubleshootingSetting Up the Printer Removing the Protective Materials UnpackingProtective material Remove the protective materials C as the illustration Connecting the Printer to Your Computer TM-U375TM-U375P Connecting the Printer to Your Drawer TM-U375 TM-U375P Anschließen des Druckers an lhre Geldlade AchtungAchtung TM-U375 Grounding the Printer Connecting the Power Supply Plug the power supply’s power cord into an electrical outlet Installing the Ribbon Cassette Setting Up the Printer 1 1 Installing the Paper Roll Paper inlet Paper Load switch Running the Self-test Running the self-test with paper rollRunning the self-test with the slip paper Running the self-test with validation paper Setting the DIP Switches DIP Switch Set TM-U375 DIP-switch functions42CPL/35CPL 40CPL/33CPL TM-U375P DIP-switch functionsAdjusting the Paper Roll End Sensing Position Distance a Adjustment position number Using the Power Switch Cover Using the Printer Operating the Control Panel ButtonsLndicator lights Page Validation Paper Handling Slip Paper HandlingReplacing the Paper Roll Replacing the Ribbon Cassette Qsh Removing the ribbon cassetteOr 3 times Print head Troubleshooting Printing problems General problemsError light is off but nothing is printed Page Release lever Left side of the printer Starting hexadecimal dumping Hexadecimal DumpingEnding hexadecimal dumping Reference Information Character Specifications Printing SpecificationsPaper Paper SpecificationsNumber of Copies Ambient Temperature Glue Location of Slip paper Page Humidity Environmental SpecificationsPrinting on Cut Sheets Interface SpecificationsPage Example print control for cut sheet Transmit Status Identification 12 c