Distance A
a
* Notes:
There may be some difference between the measured distance A and the actual sensing position.
3. Find the corresponding adjustment position number from the table below.
Distance A | Adjustment position number |
10 mm (0.39 inch) | #l |
8 mm (0.32 inch) | #2 |
6 mm (0.24 inch) | #3 |
4 mm (0.16 inch) | #4 |
2 mm (0.08 inch) | #5 |
4.Loosen the detector screw with a coin or screwdriver.
5.Set the detector scale to the position you determined from the table by moving the detector screw up or down. The numbers #1, #2, #3... are not marked on the detector scale. Use the illustration below for reference.
Detector scale
Detector scale
6.Secure the detector screw; then replace the