Epson TM-U375 user manual Removing the ribbon cassette, Qsh

Page 42

,

Note:

Qsh

There are two ways to replace the ribbon cassette. One is to turn the

 

printer off and on again before installing or removing the ribbon

 

cassette, making sure that data sent from the computer is not lost.

 

(When you turn off the printer power, data sent from the computer

 

is lost.) The other is to open the printer cover and press the

 

RELEASE button before installing or removing the ribbon cassette.

 

Both ways cause the print head to move to the center of the printer

 

and the paper clamp to release. If one of these ways is not used, the

 

ribbon might not be inserted or removed correctly.

Removing the ribbon cassette

1.Turn the printer power off and on again; then open the printer cover.

2.Grasp the ribbon cassette’s tab on the left side, lift the left side out first, and then pull the cassette out of the printer, as shown in the illustration below.

Tab-

Using the Printer 2-7

Page 41 Page 43
Image 42
Page 41 Page 43
Contents TM-U375 Printer Part Names Control PanelPage EMC and Safety Standards Applied CE Marking Gereäuschpegel Features About This Manual Setting up and UsingReference Contents Troubleshooting Reference InformationSetting Up the Printer Unpacking Removing the Protective MaterialsProtective material Connecting the Printer to Your Computer TM-U375 Remove the protective materials C as the illustrationTM-U375P Connecting the Printer to Your Drawer TM-U375 TM-U375P Achtung Anschließen des Druckers an lhre GeldladeAchtung TM-U375 Grounding the Printer Connecting the Power Supply Plug the power supply’s power cord into an electrical outlet Installing the Ribbon Cassette Setting Up the Printer 1 1 Installing the Paper Roll Paper inlet Paper Load switch Running the Self-test Running the self-test with paper rollRunning the self-test with the slip paper Running the self-test with validation paper Setting the DIP Switches TM-U375 DIP-switch functions DIP Switch SetTM-U375P DIP-switch functions 42CPL/35CPL 40CPL/33CPLAdjusting the Paper Roll End Sensing Position Distance a Adjustment position number Using the Power Switch Cover Using the Printer Operating the Control Panel ButtonsLndicator lights Page Slip Paper Handling Validation Paper HandlingReplacing the Paper Roll Replacing the Ribbon Cassette Removing the ribbon cassette QshOr 3 times Print head Troubleshooting General problems Printing problemsError light is off but nothing is printed Page Release lever Left side of the printer Hexadecimal Dumping Starting hexadecimal dumpingEnding hexadecimal dumping Reference Information Printing Specifications Character SpecificationsPaper Specifications PaperNumber of Copies Ambient Temperature Glue Location of Slip paper Page Environmental Specifications HumidityInterface Specifications Printing on Cut SheetsPage Example print control for cut sheet Transmit Status Identification 12 c
Top Page Image Contents