Epson TM-U375 user manual Release lever Left side of the printer

Page 49

4.Cut the paper roll.

5.Remove the paper jam while pulling the release lever toward you, and pull the paper out in the direction of the arrow as shown in the illustration below.

, Notes:

Q?l 1. Never pull out the jammed paper in the opposite direction from the ejection side of the printer.

2.Pull out the paper gently in the paper feeding direction, and make sure you remove any remaining pieces.

Release lever

Left side of the printer

6.Press down the print head cover after confirming that the print head is at the center of the printer. If the print head is not at the center of the printer, bring it to the center by holding the base of the print head.

Troubleshooting 3-5

Image 49
Contents TM-U375 Control Panel Printer Part NamesPage EMC and Safety Standards Applied CE Marking Gereäuschpegel About This Manual Setting up and Using FeaturesReference Contents Reference Information TroubleshootingSetting Up the Printer Removing the Protective Materials UnpackingProtective material Remove the protective materials C as the illustration Connecting the Printer to Your Computer TM-U375TM-U375P Connecting the Printer to Your Drawer TM-U375 TM-U375P Anschließen des Druckers an lhre Geldlade AchtungAchtung TM-U375 Grounding the Printer Connecting the Power Supply Plug the power supply’s power cord into an electrical outlet Installing the Ribbon Cassette Setting Up the Printer 1 1 Installing the Paper Roll Paper inlet Paper Load switch Running the self-test with paper roll Running the Self-testRunning the self-test with the slip paper Running the self-test with validation paper Setting the DIP Switches DIP Switch Set TM-U375 DIP-switch functions42CPL/35CPL 40CPL/33CPL TM-U375P DIP-switch functionsAdjusting the Paper Roll End Sensing Position Distance a Adjustment position number Using the Power Switch Cover Using the Printer Buttons Operating the Control PanelLndicator lights Page Validation Paper Handling Slip Paper HandlingReplacing the Paper Roll Replacing the Ribbon Cassette Qsh Removing the ribbon cassetteOr 3 times Print head Troubleshooting Printing problems General problemsError light is off but nothing is printed Page Release lever Left side of the printer Starting hexadecimal dumping Hexadecimal DumpingEnding hexadecimal dumping Reference Information Character Specifications Printing SpecificationsPaper Paper SpecificationsNumber of Copies Ambient Temperature Glue Location of Slip paper Page Humidity Environmental SpecificationsPrinting on Cut Sheets Interface SpecificationsPage Example print control for cut sheet Transmit Status Identification 12 c