Epson TM-U375 user manual

Page 20

Connecting the Printer to Your Direct Connection Display

Module (For the TM-U375 only)

Follow the procedures below to connect a direct connection display module to the printer only when you use the printer as a single unit (not connected to an intelligent module). When you use the printer with the intelligent module, refer to the IT-U Series User’s Manual for details.

1.Make sure that the printer is turned off.

2.Plug the cable connector (provided with the direct connection display module) securely into the printer’s display module connector until it clicks.

TM-U375

ACAUTIONS:

1.Do not connect a telephone line to the drawer kick out connector.

2.Do not confuse the drawer kick out connector and the display module connector.

3.Never connect any product other than the display module to the DM connector.

4.If you connect any product other than the display module to the DM connector, Seiko Epson Corporation is not liable for any damage to the other product or to the TM-U375 itself.

1-10 Setting Up the Printer

Image 20

Contents TM-U375 Printer Part Names Control PanelPage EMC and Safety Standards Applied CE Marking Gereäuschpegel Features About This Manual Setting up and UsingReference Contents Troubleshooting Reference InformationSetting Up the Printer Unpacking Removing the Protective MaterialsProtective material Connecting the Printer to Your Computer TM-U375 Remove the protective materials C as the illustrationTM-U375P Connecting the Printer to Your Drawer TM-U375 TM-U375P Achtung Anschließen des Druckers an lhre GeldladeAchtung TM-U375 Grounding the Printer Connecting the Power Supply Plug the power supply’s power cord into an electrical outlet Installing the Ribbon Cassette Setting Up the Printer 1 1 Installing the Paper Roll Paper inlet Paper Load switch Running the self-test with the slip paper Running the Self-testRunning the self-test with paper roll Running the self-test with validation paper Setting the DIP Switches TM-U375 DIP-switch functions DIP Switch SetTM-U375P DIP-switch functions 42CPL/35CPL 40CPL/33CPLAdjusting the Paper Roll End Sensing Position Distance a Adjustment position number Using the Power Switch Cover Using the Printer Lndicator lights Operating the Control PanelButtons Page Slip Paper Handling Validation Paper HandlingReplacing the Paper Roll Replacing the Ribbon Cassette Removing the ribbon cassette QshOr 3 times Print head Troubleshooting General problems Printing problemsError light is off but nothing is printed Page Release lever Left side of the printer Hexadecimal Dumping Starting hexadecimal dumpingEnding hexadecimal dumping Reference Information Printing Specifications Character SpecificationsPaper Specifications PaperNumber of Copies Ambient Temperature Glue Location of Slip paper Page Environmental Specifications HumidityInterface Specifications Printing on Cut SheetsPage Example print control for cut sheet Transmit Status Identification 12 c