Epson TM-U375 user manual Printing Specifications, Character Specifications

Page 53

Printing Specifications

Printing method: Serial impact dot matrix

Head wire layout: Serial type 9-pin 1/72 inch

Printing direction: Bidirectional, minimum distance printing (logic seeking)

Printing speed: Approximately 3.5 LPS

(40 columns,16 CPI, continuous printing) Approximately 5.4 LPS

(20 columns,16 CPI, continuous printing)

(LPS: Lines Per Second; CPI: Characters Per Inch)

,Note:

%During excessive use, printing stops to protect the print head. In this case, the actual printing speed may be slower than that listed above.

Characters per

line:

See the table below.

Characters per

inch:

See the table below.

Character Specifications

Number of characters:

Alphanumeric :

95

 

 

Extended graphics:

128 X 8

(tables)

 

(space pages included)

 

 

 

International:

32

 

Character structure:

7

X 9 (total horizontal dot positions: 400 half dots)

 

5

X 9 (total horizontal dot positions: 200

dots)

Character size:

See the table below.

 

 

(*) Default font is 7 X 9.

4-2 Reference Information

Image 53
Contents TM-U375 Control Panel Printer Part NamesPage EMC and Safety Standards Applied CE Marking Gereäuschpegel About This Manual Setting up and Using FeaturesReference Contents Reference Information TroubleshootingSetting Up the Printer Removing the Protective Materials UnpackingProtective material Remove the protective materials C as the illustration Connecting the Printer to Your Computer TM-U375TM-U375P Connecting the Printer to Your Drawer TM-U375 TM-U375P Anschließen des Druckers an lhre Geldlade AchtungAchtung TM-U375 Grounding the Printer Connecting the Power Supply Plug the power supply’s power cord into an electrical outlet Installing the Ribbon Cassette Setting Up the Printer 1 1 Installing the Paper Roll Paper inlet Paper Load switch Running the self-test with the slip paper Running the Self-testRunning the self-test with paper roll Running the self-test with validation paper Setting the DIP Switches DIP Switch Set TM-U375 DIP-switch functions42CPL/35CPL 40CPL/33CPL TM-U375P DIP-switch functionsAdjusting the Paper Roll End Sensing Position Distance a Adjustment position number Using the Power Switch Cover Using the Printer Lndicator lights Operating the Control PanelButtons Page Validation Paper Handling Slip Paper HandlingReplacing the Paper Roll Replacing the Ribbon Cassette Qsh Removing the ribbon cassetteOr 3 times Print head Troubleshooting Printing problems General problemsError light is off but nothing is printed Page Release lever Left side of the printer Starting hexadecimal dumping Hexadecimal DumpingEnding hexadecimal dumping Reference Information Character Specifications Printing SpecificationsPaper Paper SpecificationsNumber of Copies Ambient Temperature Glue Location of Slip paper Page Humidity Environmental SpecificationsPrinting on Cut Sheets Interface SpecificationsPage Example print control for cut sheet Transmit Status Identification 12 c