Slip Paper Handling
Use only slip paper (flat paper without wrinkles, creases, or folds) that matches the specifications.
I Note:
Qh Be sure to install the paper roll in the printer, even if you plan to print only on slip paper. This will prevent paper jams.
1.Send the appropriate control commands from the computer to print on slip paper.
2.When the VALIDATION/SLIP light flashes, insert a slip into the slip paper inlet as shown in the illustration below.
Make sure you insert the slip paper into the inlet as far as it will go.
3. The paper will automatically be drawn in and printing will begin.
a
, Note:
When the VALIDATION/SLIP light flashes (this depends on the application software), remove the paper from the paper path.
Validation Paper Handling
Use only validation paper (flat paper, without wrinkles, creases, or folds) that matches the specifications.
,Note:
%Be sure to install the paper roll in the printer, even if you plan to print only on validation paper. This will prevent paper jams.