English
Note:
Do not remove the screw from the print head cover.
8.Lift up the print head cover as shown in illustration 14 on the previous page.
9.Remove all the jammed paper.
Note:
Do not pull the jammed paper in the opposite direction of paper feeding.
10.Replace the print head cover and secure it with the screw.
11.Replace the ribbon cassette and close the autocutter.
12.If the autocutter blade is not in its normal position (if you can see the blade in the autocutter slit, which is indicated by an arrow in illustration 15 below), the blade is not in the normal position), insert a screwdriver to the right side of the autocutter, and turn the gear inside to move the blade to the normal position.
15
13. Replace the paper roll and close the printer cover.