Epson TM-H5000/H5000P manual GS H n, GS I n

•When the LSB is 0, white/black reverse mode is turned off.

•When the LSB is 1, white/black reverse mode is turned on.

GS H n

[Name]	Select printing position of HRI characters
[Format]	ASCII	GS	H	n
	Hex	1D	48	n
	Decimal	29	72	n
[Range]	0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Description]	Selects the printing position of HRI characters when printing a bar code.
	n selects the printing position as follows:
n	Printing posiition
0, 48	Not printed.
1, 49	Above bar code.
2, 50	Below bar code.
3, 51	Both above and below the bar code.
	• HRI indicates Human Readable Interpretation.
GS I n
[Name]	Transmit printer ID
[Format]	ASCII	GS	I	n
	Hex	1D	49	n
	Decimal	29	73	n

[Range]		1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description]		Transmits the printer ID specified by n as follows:
n				Printer ID			Specification	ID (hexidecimal)
1, 49				Printer model ID			TM-H5000/H5000P	0FH
2, 50				Type ID			See table below.
3, 51				ROM version ID			Depends on ROM version.
n=2, Type ID
Bit	Off/On		Hex		Decimal	Function
0	Off		00		0	Two-byte character code not supported.
1	On		02		2	Auto-cutter equipped.
2	Off		00		0	DIP switch 2-2 is set to off.
	On		04		4	DIP switch 2-2 is set to on.

Commands 5-21