AMT Datasouth 7200 manual Names Functions

7200

1.2.2 Functions

No.	Names	Functions
A	Operator panel	Houses the LEDs and keypad needed to operate
		the ATB printer.
B	Cover lock	Locks the side cover. (Use the key to open the
		cover.)
C	Inserter	Used to insert single coupons (one at a time).
D	Output stacker	Receives ejected coupons, print-side up. (Has a
		capacity of 100 coupons.)
E	Feed knobs	Used to remove jammed coupons.
F	BIN 1, BIN 2, and BIN 3	Used to load coupons into the feed rollers for
	load knobs	each bin.
G	BIN 1	Used to hold coupons for printing. (BIN 1 has a
		capacity of 500 coupons.)
H	BIN 2	Used to hold coupons for printing. (BIN 2 has a
		capacity of 500 coupons.)
I	Thermal head	Prints on the coupon.
J	Interface connector	Used to connect the printer to a downline printer
	(downline)	(reserved).
K	Power switch	Turns the power on and off.
L	Power connector	Used to connect the power cable.
M	Interface connector (Host)	Used to connect the ATB printer to the terminal.
N	BIN 3	Used to insert coupons. (BIN 3 has a capacity of
		1000 coupons externally.)
O	Thermal transfer take-up	Holds used ribbon after thermal transfer printing
	reel	(type D unit only).
P	Thermal transfer supply	Supplies ribbon for thermal transfer printing (type
	reel	D unit only).

1-4 Operation Manual