AMT Datasouth 7200 manual Product Safety

Page 5

7200

Product Safety

This manual uses a variety of terms and symbols to ensure the safe operation of the product, help prevent hazards to yourself and others, and help prevent property damage. The following

describes terms, symbols, and meanings used in this manual. Before reading this manual, please familiarize yourself with the terms and symbols below.

Terms

WARNING

CAUTION

Ignoring this cautionary note and handling the product improperly may result in death or serious injury.

Ignoring this warning and handling the product improperly may result in injury or physical property damage.

Symbols

The triangle indicates the presence of danger. Specific details of the danger are described in the triangle. (The symbol on the right indicates danger of electric shock.)

This symbol indicates a prohibited action. Specific details of

the prohibition are described in or near the symbol. (The symbol on the right indicates the item should not be disassembled.)

This symbol indicates a mandatory action. Specific details of the action are described in the symbol. (The symbol on the right indicates that the power cable must be unplugged.)

ii	Operation Manual

Image 5

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Location Operating EnvironmentSpace Required Connecting to Power Power Line ConditionsType Printing Method Number of Bins Available TypesViii Before Using the ATB Printer Checking the Package Names of Parts Names and FunctionsNames Functions FunctionsLED Functions Operator PanelLCD Panel Functions Operator Panel LayoutOnline Key FunctionsTest 7200 Operation Connecting to a Wall Receptacle Connecting the ATB PrinterConnecting the Terminal CHECK-IN Ticketing Turning the Power On and OffKey cannot be removed in the Open position Loading the DocumentsLoading Documents into BINs 1 Document Orientation Visual 7200 Do not remove the documents from the box Setting Documents in BINKeep space for the documents Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation Following operation is only for thermal transfer Changing Transfer Ribbons TT Type D OnlyLCD Panel Display Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the Printer Surface Cleaning the ATB PrinterCleaning card is optional sold separately Cleaning the Magnetic HeadRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Inserter and Magnetic Blocks Cleaning a Carrier RollerBin and Cutter Blocks To Clean BINRemoving Paper Dust 7200 Troubleshooting Jam Locations and Corresponding Messages Paper JamPart Names Removing the jammed coupon Jam Position Removing ProceduresUnlock the cover before starting any procedure For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Message Error State Recovery Procedure Error MessagesTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Side Covers Open/Closed CoversPower Connection Temperature and HumidityPower Line Conditions Connecting to PowerPrinting Encoding SpecificationsBins and Feeder Transfer Ribbon Printing Type D printers only InserterOutput Stacker Appendix 2 Consumables Printer AccessoriesThermal Transfer Ribbon StoringTransfer RibbonsAMT Datasouth Corp