AMT Datasouth 7200 manual For a jam in BIN For a jam in BIN 3 Option

Page 53

7200

A. Slowly open the first side cover (bottom right) as wide as you can.

Falling covers may cause injury.

Do not take your

CAUTION hands off covers when opening and/

or closing them.

B. Slowly open the second side cover (top right) as wide as you can.

CAUTION

Falling covers may cause injury.

Do not take your hands off covers when opening and/ or closing them.

For a jam in BIN 1

For a jam in BIN 3 (Option)

C.Remove the jammed coupon from the appropriate bin.

1.Use the knob where the jam occurred:

BIN 1 — red knob BIN 2 — yellow knob BIN 3 — green knob

(continued)

For a jam in BIN 2

4-4	Operation Manual

Image 53

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Location Operating EnvironmentSpace Required Connecting to Power Power Line ConditionsType Printing Method Number of Bins Available TypesViii Before Using the ATB Printer Checking the Package Names of Parts Names and FunctionsNames Functions FunctionsLED Functions Operator PanelLCD Panel Functions Operator Panel LayoutOnline Key FunctionsTest 7200 Operation Connecting to a Wall Receptacle Connecting the ATB PrinterConnecting the Terminal CHECK-IN Ticketing Turning the Power On and OffKey cannot be removed in the Open position Loading the DocumentsLoading Documents into BINs 1 Document Orientation Visual 7200 Do not remove the documents from the box Setting Documents in BINKeep space for the documents Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation Following operation is only for thermal transfer Changing Transfer Ribbons TT Type D OnlyLCD Panel Display Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the Printer Surface Cleaning the ATB PrinterCleaning card is optional sold separately Cleaning the Magnetic HeadRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Inserter and Magnetic Blocks Cleaning a Carrier RollerBin and Cutter Blocks To Clean BINRemoving Paper Dust 7200 Troubleshooting Jam Locations and Corresponding Messages Paper JamPart Names Removing the jammed coupon Jam Position Removing ProceduresUnlock the cover before starting any procedure For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Message Error State Recovery Procedure Error MessagesTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Side Covers Open/Closed CoversPower Connection Temperature and HumidityPower Line Conditions Connecting to PowerPrinting Encoding SpecificationsBins and Feeder Transfer Ribbon Printing Type D printers only InserterOutput Stacker Appendix 2 Consumables Printer AccessoriesThermal Transfer Ribbon StoringTransfer RibbonsAMT Datasouth Corp