AMT Datasouth 7200 manual Changing Transfer Ribbons TT Type D Only, LCD Panel Display

Page 37

7200

2.7 Changing Transfer Ribbons (TT — Type D Only)

When the transfer ribbon needs replacement, the LCD panel displays a message.

LCD Panel Display

WARNING:

END OF RIBBON

The following operation is only for thermal transfer.

Replace the transfer ribbon following the steps below:

A. Release the key lock of the side cover. Turn the key clockwise to the OPEN position.

Note!

The key cannot be removed in the

OPEN position.

Side cover

(bottom right)

Side cover (top right)

B.Slowly open the first side cover (bottom right) as wide as possible.

Falling covers may cause injury.

Do not take your CAUTION hands off covers

when opening and/ or closing them.

C.Slowly open the second side cover (top right) as wide as possible.

2-18	Operation Manual

Image 37

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Location Operating EnvironmentSpace Required Connecting to Power Power Line ConditionsType Printing Method Number of Bins Available TypesViii Before Using the ATB Printer Checking the Package Names of Parts Names and FunctionsNames Functions FunctionsLED Functions Operator PanelLCD Panel Functions Operator Panel LayoutOnline Key FunctionsTest 7200 Operation Connecting to a Wall Receptacle Connecting the ATB PrinterConnecting the Terminal CHECK-IN Ticketing Turning the Power On and OffLoading Documents into BINs 1 Loading the DocumentsKey cannot be removed in the Open position Document Orientation Visual 7200 Keep space for the documents Setting Documents in BINDo not remove the documents from the box Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation LCD Panel Display Changing Transfer Ribbons TT Type D OnlyFollowing operation is only for thermal transfer Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the Printer Surface Cleaning the ATB PrinterCleaning card is optional sold separately Cleaning the Magnetic HeadRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Inserter and Magnetic Blocks Cleaning a Carrier RollerBin and Cutter Blocks To Clean BINRemoving Paper Dust 7200 Troubleshooting Part Names Paper JamJam Locations and Corresponding Messages Unlock the cover before starting any procedure Jam Position Removing ProceduresRemoving the jammed coupon For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Message Error State Recovery Procedure Error MessagesTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Side Covers Open/Closed CoversPower Connection Temperature and HumidityPower Line Conditions Connecting to PowerBins and Feeder Encoding SpecificationsPrinting Output Stacker InserterTransfer Ribbon Printing Type D printers only Appendix 2 Consumables Printer AccessoriesThermal Transfer Ribbon StoringTransfer RibbonsAMT Datasouth Corp