AMT Datasouth 7200 manual Loading the Documents, Loading Documents into BINs 1

Page 24

7200 OPERATION

2.3 Loading the Documents

Documents are loaded into the bins. The printer has two internal bins (1 and 2) and one external bin (3). The two or three bins can store the same or different types of documents. When different types of documents are loaded, the bins are selected as specified by the terminal.

2.3.1 Loading Documents into BINs 1 and 2

Each internal bin can store up to 500 documents. The following explains how to load the documents. Refer to the next section for loading documents into BIN 3.

(Documents in a box)

A.Take the documents out of the package. It is not necessary to take coupons out of the box when using 500 coupon size boxes.

Falling covers may cause injury. Do not

take your hands off CAUTION covers when open-

ing and/or closing them.

B.Release the key lock of the side cover. Turn the key clockwise to the OPEN position.

Note!

The key cannot be removed in the OPEN position.

C. Slowly open the first side cover (bottom right) as wide as possible.

Side cover (bottom right)

Operation Manual

2-5

Image 24

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Operating Environment LocationSpace Required Power Line Conditions Connecting to PowerAvailable Types Type Printing Method Number of BinsViii Before Using the ATB Printer Checking the Package Names and Functions Names of PartsFunctions Names FunctionsOperator Panel LED FunctionsLCD Panel Functions Operator Panel LayoutKey Functions OnlineTest 7200 Operation Connecting the ATB Printer Connecting to a Wall ReceptacleConnecting the Terminal Turning the Power On and Off CHECK-IN TicketingLoading the Documents Loading Documents into BINs 1Key cannot be removed in the Open position Document Orientation Visual 7200 Setting Documents in BIN Keep space for the documentsDo not remove the documents from the box Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation Changing Transfer Ribbons TT Type D Only LCD Panel DisplayFollowing operation is only for thermal transfer Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the ATB Printer Cleaning the Printer SurfaceCleaning the Magnetic Head Cleaning card is optional sold separatelyRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Cleaning a Carrier Roller Inserter and Magnetic BlocksTo Clean BIN Bin and Cutter BlocksRemoving Paper Dust 7200 Troubleshooting Paper Jam Part NamesJam Locations and Corresponding Messages Jam Position Removing Procedures Unlock the cover before starting any procedureRemoving the jammed coupon For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Messages Error Message Error State Recovery ProcedureTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Appendix 1 Specifications Document Carrier StructureDocument Carrier Structure Covers Side Covers Open/ClosedTemperature and Humidity Power ConnectionPower Line Conditions Connecting to PowerEncoding Specifications Bins and FeederPrinting Inserter Output StackerTransfer Ribbon Printing Type D printers only Printer Accessories Appendix 2 ConsumablesThermal Transfer Ribbon StoringTransfer RibbonsAMT Datasouth Corp