AMT Datasouth 7200 manual Troubleshooting

			7200 TROUBLESHOOTING
Error Message	Error State	Recovery Procedure
OUT OF	The requested document has ended.	Install the documents.
REQUESTED PAPER
ENCODING ERROR	Encoding could not be executed normally.	Remove the void coupon.
REMOVE VOID DOC.
MULTIPLE ENCODING	Encoding error has occurred twice	Remove the void coupon and clean
ERROR	continuously.	the magnetic head. Verify that the
		coupon is properly inserted.
CHECK-IN	The interface has an error.	Wait for the Check-In to end.
IN PROGRESS	(During the Check-In.)
TICKETING	The interface has an error.	Wait for the Ticketing to end.
IN PROGRESS	(During the ticketing.)
WARNING:	Ribbon ends (when TT is set)	Install a new transfer ribbon.
END OF RIBBON		(Refer to "Changing Transfer
		Ribbons".)
WARNING:	No transfer ribbon (when TT is set)	Install a transfer ribbon.
DETACHED RIBBON		(Refer to "Installing the Transfer
		Ribbon".)
WARNING:	Ribbon is installed when the printer is in	Remove the transfer ribbon.
ATTACHED RIBBON	direct thermal mode.
WARNING:	The output stacker is full.	Remove the document from the
STACKER FULL		output stacker.
WARNING:	The cover is open.	Close and lock the cover.
COVER OPENED
WARNING:	Documents have run out (in this case, only	Load documents.
PAPER OUT 1 2 3	the related bin is displayed).
TAKE YOUR	Not an error.	Take the coupon.
DOCUMENT
PAPER JAM:ZONE A	Paper jam in BIN 1.	Remove the jammed coupon.
STOCKER 1		(Refer to "Paper Jam".)
PAPER JAM:ZONE A	Paper jam in BIN 2.
STOCKER 2
PAPER JAM:ZONE A	Paper jam in the slot of BIN 3.
STOCKER 3
PAPER JAM:ZONE A	Paper jam in the cutter block.
CUTTER BLOCK
PAPER JAM:ZONE B	Paper jam in the magnetic block.
MAGNETIC BLOCK
PAPER JAM:ZONE C	Paper jam in the printing block.
PRINTING BLOCK
PAPER JAM:ZONE B	Paper jam in the front inserter.
INSERTER

Operation Manual 4-13