AMT Datasouth 7200 manual LED Functions, LCD Panel Functions, Operator Panel Layout

Page 16

7200 BEFORE USING THE S7200

1.2.3 Operator Panel

Operator Panel Layout

ONLINEI	DATA	ERROR	MODE	LEDs
ONLINEI	DATA	ERROR	MODE
				L C D
				16 columns by 2 rows
ONLINEI		RESET	EJECT	Keys
ENTER		QUIIT	é	Keys
ENTER		QUIIT	é
TEST		SET UP	CLEANINGI
ç		è	ê

LED Functions

LEDs indicate printer status by turning on, turning off, or blinking.

ONLINE

DATA

ERROR

MODE

	ON	— The ATB printer is online. The ATB printer can
		receive and print data from the terminal. The printer is
		set online when the power is turned on.
	OFF	— The ATB printer is offline (i.e., Setup and Test
		available).
	Blinking	— An ATB printer error or improper Host connection.
	ON	— The ATB printer is sending or receiving data to or from
	ON	the terminal, or is printing coupons.
		the terminal, or is printing coupons.
	ON	— An error or jam has occurred. (The buzzer sounds.)
	ON	— The ATB printer is in TEST, SETUP, or CLEANING
		mode.

LCD Panel Functions

The LCD panel displays the operating status or setup values for the ATB printer in 16 columns and 2 rows.

Operation Manual

1-5

Image 16

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Operating Environment LocationSpace Required Power Line Conditions Connecting to PowerAvailable Types Type Printing Method Number of BinsViii Before Using the ATB Printer Checking the Package Names and Functions Names of PartsFunctions Names FunctionsOperator Panel LED FunctionsLCD Panel Functions Operator Panel LayoutKey Functions OnlineTest 7200 Operation Connecting the ATB Printer Connecting to a Wall ReceptacleConnecting the Terminal Turning the Power On and Off CHECK-IN TicketingLoading Documents into BINs 1 Loading the DocumentsKey cannot be removed in the Open position Document Orientation Visual 7200 Keep space for the documents Setting Documents in BINDo not remove the documents from the box Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation LCD Panel Display Changing Transfer Ribbons TT Type D OnlyFollowing operation is only for thermal transfer Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the ATB Printer Cleaning the Printer SurfaceCleaning the Magnetic Head Cleaning card is optional sold separatelyRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Cleaning a Carrier Roller Inserter and Magnetic BlocksTo Clean BIN Bin and Cutter BlocksRemoving Paper Dust 7200 Troubleshooting Part Names Paper JamJam Locations and Corresponding Messages Unlock the cover before starting any procedure Jam Position Removing ProceduresRemoving the jammed coupon For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Messages Error Message Error State Recovery ProcedureTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Covers Side Covers Open/ClosedTemperature and Humidity Power ConnectionPower Line Conditions Connecting to PowerBins and Feeder Encoding SpecificationsPrinting Output Stacker InserterTransfer Ribbon Printing Type D printers only Printer Accessories Appendix 2 ConsumablesThermal Transfer Ribbon StoringTransfer RibbonsAMT Datasouth Corp