AMT Datasouth 7200 manual Operating Environment, Location

Page 7

7200

Caution Label

This product comes with a caution label attached as described below.

Caution Label

CAUTION

Falling covers may cause injury.

Do not take your hands off covers when opening and/ or closing them.

Operating Environment

Location

•Do not place the product in direct sunlight or near heating sources such as stoves or heaters.

•Do not place the product in a dusty or humid environment.

•Do not place the product under strong shock or vibration.

•Do not place the product in a strong magnetic or radio field, or near a television set or radio.

•Make sure that the vents are not blocked. Make sure that the installation location is well ventilated and that air can freely circulate around the product.

•Do not place the product where contact with chemicals is likely.

iv	Operation Manual

Image 7

Contents 7200 Contents Is intentionally blank Introduction FCC Warning Product Safety Safety Considerations Location Operating EnvironmentSpace Required Connecting to Power Power Line ConditionsType Printing Method Number of Bins Available TypesViii Before Using the ATB Printer Checking the Package Names of Parts Names and FunctionsNames Functions FunctionsOperator Panel Layout Operator PanelLED Functions LCD Panel FunctionsOnline Key FunctionsTest 7200 Operation Connecting to a Wall Receptacle Connecting the ATB PrinterConnecting the Terminal CHECK-IN Ticketing Turning the Power On and OffLoading Documents into BINs 1 Loading the DocumentsKey cannot be removed in the Open position Document Orientation Visual 7200 Keep space for the documents Setting Documents in BINDo not remove the documents from the box Key cannot be removed Open position Close the side cover top right 7200 Loading Documents into the Inserter Installing the Transfer Ribbon TT Type D Only Pivots Lock Operation LCD Panel Display Changing Transfer Ribbons TT Type D OnlyFollowing operation is only for thermal transfer Treat used transfer ribbons as plastic waste 7200 Daily Maintenance Cleaning the Printer Surface Cleaning the ATB PrinterCleaning card is optional sold separately Cleaning the Magnetic HeadRepeat the cleaning procedure several times as necessary Cleaning the Thermal Head Cleaning a Platen Roller Inserter and Magnetic Blocks Cleaning a Carrier RollerBin and Cutter Blocks To Clean BINRemoving Paper Dust 7200 Troubleshooting Part Names Paper JamJam Locations and Corresponding Messages Unlock the cover before starting any procedure Jam Position Removing ProceduresRemoving the jammed coupon For a jam in BIN For a jam in BIN 3 Option After the jammed coupon has been cut If the jammed coupon has not been cut Side pressure roller Method varies depending on the location of the jammed coupon To remove the jammed coupon, go to step E Rear end of the jammed ticket is on the blade Troubleshooting Error Message Error State Recovery Procedure Error MessagesTroubleshooting L O G I C a L Error M e s s a g e Error State Recovery Procedure 7200 Document Carrier Structure Appendix 1 SpecificationsDocument Carrier Structure Side Covers Open/Closed CoversConnecting to Power Temperature and HumidityPower Connection Power Line ConditionsBins and Feeder Encoding SpecificationsPrinting Output Stacker InserterTransfer Ribbon Printing Type D printers only StoringTransfer Ribbons Printer AccessoriesAppendix 2 Consumables Thermal Transfer RibbonAMT Datasouth Corp