Siemens 2614 manual Static IP Address Fixed IP

Page 17

Static IP Address (Fixed IP)

If your selected Static IP Address as your WAN connection type, the Simple Setup WAN Fixed IP screen displays when you click More Configuration.

1.In the IP address assigned by your ISP boxes, enter your IP address.

2.In the Subnet Mask boxes, enter the subnet mask for the SpeedStream 2614: 255, 255, 255, 0

3.In the ISP Gateway Address boxes, enter the gateway address of your ISP.

Note:

You may need a fixed address if you want to provide Internet services such as a Web server or FTP server. Most ISPs can provide you with a fixed address, most often for an additional monthly fee.

PPP over Ethernet (PPPoE)

If you selected PPP over Ethernet as your WAN connection type, the Simple Setup WAN PPPoE screen displays when you click More Configuration.

1.In the User Name box, enter the user name assigned by your ISP.

2.In the Password box, enter the password assigned by your ISP.

3.In the Please retype your password box, enter the same password.

4.In the Service Name box, enter the service name if it is required by your ISP.

5.Click Enter to accept the settings and continue.

Dial-up on Demand (Modem)

If you selected Dial-up on Demand as your WAN connection type (via an ISDN TA or PSTN modem attached to the SpeedStream 2614 serial port), the Simple Setup WAN Dial-up Modem screen displays when you click More Configuration.

Note:

If your ISP has given you a secondary phone number, or if you have a secondary Internet service account,

3-6

Image 17
Contents 2614 Table of Contents Appendixes About the SpeedStream Features and BenefitsIntroduction Applications Description of Hardware Installing the SpeedstreamPackage Contents SpeedStream Installation Procedure Hardware InstallationSystem Requirements Before StartingConnecting the SpeedStream LED Status Indicators Page Navigating the Management Interface Configuring the SpeedstreamWeb Browser Management Interface Menu Item Description Menu SelectionsView Network and Device Status Configuration ChangesOn the Tools menu, click Internet Options General box, select Temporary Internet FilesSet or Change a Password Simple Setup ProceduresOn the Simple Setup menu, click Change Password Set the Time ZoneOn the Simple Setup menu, click Set Time Zone Configure the WAN ConnectionStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordRestore Factory Defaults Reset RouterUpdate Firmware Backup SettingsClick Start/Settings then click Control Panel Installing and Configuring TCP/IPInstall the TCP/IP Protocol Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Install the Print Server Program Configuring Printer ServicesSpecified location Select Port Name Windows 95/98/NT/ME Configure the Printer PortSelect Printer Port WindowsSelect Local printer then click Next 11. Select Printer Port Unix SystemsAppendix a TroubleshootingTechnical Support Appendix B Cable Types and SpecificationsCables Ethernet CableRJ-45 Pin Numbering RJ-45 Pin AssignmentsSerial Port Pin Assignments Serial Port to 25-Pin DCE Port on Modem DB-9 Port Pin AssignmentsSerial Port to 9-Pin COM Port on Computer Serial Port to 25-Pin DTE Port on Computer Printer Port Pin AssignmentsDB-25 Printer Port Pin Assignments Pin Signal Name DirectionSpecifications Temperature