Siemens 2614 manual Reset Router, Restore Factory Defaults, Update Firmware, Backup Settings

Page 24

Reset Router

On the Tools menu or screen, click Reset Router to reboot the router and retain all your configuration settings.

Restore Factory Defaults

On the Tools menu or screen, click Restore Factory Defaults to reboot the router, overwriting your configuration settings with those of the factory defaults.

Update Firmware

On the Tools menu or screen, click Update Firmware to download the newest version of the firmware from the SpeedStream support Web site. You will be directed to download the update file; then click Enter. to install.

Backup Settings

On the Tools screen, click Backup Settings to save your configurations. The File Download dialog box displays. Select a location to which the system will download the config.bin file.

Restore Settings

On the Tools screen, click Restore to restore the last saved config.bin file.

3-13

Image 24

Contents 2614 Table of Contents Appendixes Features and Benefits IntroductionAbout the SpeedStream Applications Installing the Speedstream Package ContentsDescription of Hardware SpeedStream Hardware Installation Installation ProcedureSystem Requirements Before StartingConnecting the SpeedStream LED Status Indicators Page Configuring the Speedstream Web Browser Management InterfaceNavigating the Management Interface Menu Selections Menu Item DescriptionConfiguration Changes View Network and Device StatusOn the Tools menu, click Internet Options General box, select Temporary Internet FilesSimple Setup Procedures Set or Change a PasswordOn the Simple Setup menu, click Change Password Set the Time ZoneConfigure the WAN Connection On the Simple Setup menu, click Set Time ZoneStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Advanced Setup Procedures Configure LAN Gateway and Dhcp SettingsEnable Firewall Protection Enable Virtual Server Configure Special Applications Network Address Translation NATConfigure Miscellaneous Features Configure Client FilteringOn the Tools menu, click Change Password System ToolsReset Router Restore Factory DefaultsUpdate Firmware Backup SettingsInstalling and Configuring TCP/IP Install the TCP/IP ProtocolClick Start/Settings then click Control Panel Configure TCP/IP for the SpeedStream Dynamic IP Allocation via a Dhcp ServerManual IP Configuration TCP/IP VerificationIs TCP/IP properly configured on your computer? Configuring Printer Services Install the Print Server ProgramSpecified location Select Port Name Configure the Printer Port Windows 95/98/NT/MEWindows Select Printer PortSelect Local printer then click Next Unix Systems 11. Select Printer PortTroubleshooting Appendix aTechnical Support Cable Types and Specifications Appendix BCables Ethernet CableRJ-45 Pin Assignments Serial Port Pin AssignmentsRJ-45 Pin Numbering DB-9 Port Pin Assignments Serial Port to 9-Pin COM Port on ComputerSerial Port to 25-Pin DCE Port on Modem Printer Port Pin Assignments Serial Port to 25-Pin DTE Port on ComputerPin Signal Name Direction DB-25 Printer Port Pin AssignmentsSpecifications Temperature