Siemens 2614 manual Is TCP/IP properly configured on your computer?

Page 28

However, if the following message appears, there may be something wrong in your installation procedure:

Pinging 192.168.254.254 with 32 bytes of data:

Request timed out.

2.If the request times out, confirm the following items in sequence:

•Is the Ethernet cable correctly connected between the SpeedStream 2614 and your computer?

The LAN LED on the SpeedStream 2614 and the Link LED of the network card on your computer must be on.

•Is TCP/IP properly configured on your computer?

If the IP address of the SpeedStream 2614 is 192.168.254.254, the IP address of your computer must be from 192.168.254.1 to 192.168.254.253, and the default gateway must be 192.168.254.1.

3.When you can successfully ping the SpeedStream 2614, you are ready to connect to the Internet!

4-4

Image 28

Contents 2614 Table of Contents Appendixes Introduction Features and BenefitsAbout the SpeedStream Applications Package Contents Installing the SpeedstreamDescription of Hardware SpeedStream Hardware Installation Installation ProcedureSystem Requirements Before StartingConnecting the SpeedStream LED Status Indicators Page Web Browser Management Interface Configuring the SpeedstreamNavigating the Management Interface Menu Selections Menu Item DescriptionConfiguration Changes View Network and Device StatusOn the Tools menu, click Internet Options General box, select Temporary Internet FilesSimple Setup Procedures Set or Change a PasswordOn the Simple Setup menu, click Change Password Set the Time ZoneConfigure the WAN Connection On the Simple Setup menu, click Set Time ZoneStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Advanced Setup Procedures Configure LAN Gateway and Dhcp SettingsEnable Firewall Protection Enable Virtual ServerConfigure Special Applications Network Address Translation NATConfigure Miscellaneous Features Configure Client FilteringOn the Tools menu, click Change Password System ToolsReset Router Restore Factory DefaultsUpdate Firmware Backup Settings Install the TCP/IP Protocol Installing and Configuring TCP/IP Click Start/Settings then click Control Panel Configure TCP/IP for the SpeedStream Dynamic IP Allocation via a Dhcp ServerManual IP Configuration TCP/IP VerificationIs TCP/IP properly configured on your computer? Configuring Printer Services Install the Print Server ProgramSpecified location Select Port Name Configure the Printer Port Windows 95/98/NT/MEWindows Select Printer PortSelect Local printer then click Next Unix Systems 11. Select Printer PortTroubleshooting Appendix aTechnical Support Cable Types and Specifications Appendix BCables Ethernet CableSerial Port Pin Assignments RJ-45 Pin AssignmentsRJ-45 Pin Numbering Serial Port to 9-Pin COM Port on Computer DB-9 Port Pin AssignmentsSerial Port to 25-Pin DCE Port on Modem Printer Port Pin Assignments Serial Port to 25-Pin DTE Port on ComputerPin Signal Name Direction DB-25 Printer Port Pin AssignmentsSpecifications Temperature