Siemens 2614 manual Technical Support

Page 37

Symptom

Action

Printer Server

The printer cannot print or prints garbage

Make sure the parallel cable between the SpeedStream 2614 and printer is connected and is in good condition

Table A-1. Troubleshooting Chart

Technical Support

Before contacting Technical Support, please refer to the previous Troubleshooting table. If you are still unable to resolve the problem, be prepared to provide the following information:

Model number (SpeedStream 2614)

Software version

Date of purchase or installation

Description of the problem

Technical Support for North America is available 24 hours a day, 7 days a week, by phone, email or online:

Phone: 877-823-6722

Email: support@speedstream.com

Online: http://www.speedstream.com

FTP: ftp.speedstream.com

A-2

Image 37
Contents 2614 Table of Contents Appendixes Introduction Features and BenefitsAbout the SpeedStream Applications Package Contents Installing the SpeedstreamDescription of Hardware SpeedStream Installation Procedure Hardware InstallationSystem Requirements Before StartingConnecting the SpeedStream LED Status Indicators Page Web Browser Management Interface Configuring the SpeedstreamNavigating the Management Interface Menu Item Description Menu SelectionsView Network and Device Status Configuration ChangesOn the Tools menu, click Internet Options General box, select Temporary Internet FilesSet or Change a Password Simple Setup ProceduresOn the Simple Setup menu, click Change Password Set the Time ZoneOn the Simple Setup menu, click Set Time Zone Configure the WAN ConnectionStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordRestore Factory Defaults Reset RouterUpdate Firmware Backup SettingsInstall the TCP/IP Protocol Installing and Configuring TCP/IPClick Start/Settings then click Control Panel Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Install the Print Server Program Configuring Printer ServicesSpecified location Select Port Name Windows 95/98/NT/ME Configure the Printer PortSelect Printer Port WindowsSelect Local printer then click Next 11. Select Printer Port Unix SystemsAppendix a TroubleshootingTechnical Support Appendix B Cable Types and SpecificationsCables Ethernet CableSerial Port Pin Assignments RJ-45 Pin AssignmentsRJ-45 Pin Numbering Serial Port to 9-Pin COM Port on Computer DB-9 Port Pin AssignmentsSerial Port to 25-Pin DCE Port on Modem Serial Port to 25-Pin DTE Port on Computer Printer Port Pin AssignmentsDB-25 Printer Port Pin Assignments Pin Signal Name DirectionSpecifications Temperature