Siemens 2614 manual Advanced Setup Procedures, Configure LAN Gateway and Dhcp Settings

Page 19

address for you to use, select Yes and enter the designated IP address and subnet mask.

Advanced Setup Procedures

After completing the Simple Setup menu options, you will next move to the Advanced Setup options. You may also go directly to any of these screens by clicking that option on the main menu.

The SpeedStream 2614 DSL/Cable Router supports advanced functions including hacker attack protection, virtual servers, special applications configuration, virtual server, client filtering, and remote management. We highly recommend you keep the default settings.

Configure LAN Gateway and DHCP Settings

From this screen, you can dynamically assign the IP addresses for client computers, enable the DHCP server, set the lease time, and specify the address range.

Note:

Remember to configure all of your client computers for dynamic address allocation.

Valid IP addresses consist of four numbers separated by periods. The first three fields are the network portion, and can be from 0–255, while the last field is the host portion and can be from 1 to 254. Remember not to include the gateway address of the SpeedStream 2614 in the client address pool.

Figure 3-4. Advanced Setup LAN

3-8

Image 19

Contents 2614 Table of Contents Appendixes Introduction Features and BenefitsAbout the SpeedStream Applications Package Contents Installing the SpeedstreamDescription of Hardware SpeedStream Before Starting Hardware InstallationInstallation Procedure System RequirementsConnecting the SpeedStream LED Status Indicators Page Web Browser Management Interface Configuring the SpeedstreamNavigating the Management Interface Menu Item Description Menu SelectionsGeneral box, select Temporary Internet Files Configuration ChangesView Network and Device Status On the Tools menu, click Internet OptionsSet the Time Zone Simple Setup ProceduresSet or Change a Password On the Simple Setup menu, click Change Password On the Simple Setup menu, click Set Time Zone Configure the WAN ConnectionStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordBackup Settings Reset RouterRestore Factory Defaults Update FirmwareInstall the TCP/IP Protocol Installing and Configuring TCP/IPClick Start/Settings then click Control Panel Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Install the Print Server Program Configuring Printer ServicesSpecified location Select Port Name Windows 95/98/NT/ME Configure the Printer PortSelect Printer Port WindowsSelect Local printer then click Next 11. Select Printer Port Unix SystemsAppendix a TroubleshootingTechnical Support Ethernet Cable Cable Types and SpecificationsAppendix B CablesSerial Port Pin Assignments RJ-45 Pin AssignmentsRJ-45 Pin Numbering Serial Port to 9-Pin COM Port on Computer DB-9 Port Pin AssignmentsSerial Port to 25-Pin DCE Port on Modem Serial Port to 25-Pin DTE Port on Computer Printer Port Pin AssignmentsDB-25 Printer Port Pin Assignments Pin Signal Name DirectionSpecifications Temperature