Siemens 2614 manual Configure TCP/IP for the SpeedStream, Dynamic IP Allocation via a Dhcp Server

Page 26

Figure 4-2. Select Network Protocol

6.The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure, and restart your computer to enable the TCP/IP protocol.

Configure TCP/IP for the SpeedStream 2614

When TCP/IP is installed on your computer, follow these instructions to configure it for the SpeedStream 2614:

1.On the Windows taskbar, click Start Settings Control Panel.

2.Double-click the Network icon; then click the Configuration tab and select the TCP/IP for your network card.

3.Click the Properties button to enter the TCP/IP properties for the SpeedStream 2614. You can dynamically assign TCP/IP address settings to a client, or you can manually configure a client with address settings to meet your specific network requirements. (Note that the default IP address of the SpeedStream 2614 is 192.168.254.254.)

Dynamic IP Allocation via a DHCP Server

1.On the IP Address tab, select Obtain an IP address automatically.

2.Do not enter any values under the Gateway tab.

3.On the DNS Configuration tab, select Disable DNS. These settings will be automatically configured by the DHCP server.

4-2

Image 26

Contents 2614 Table of Contents Appendixes About the SpeedStream Features and BenefitsIntroduction Applications Description of Hardware Installing the SpeedstreamPackage Contents SpeedStream System Requirements Hardware InstallationInstallation Procedure Before StartingConnecting the SpeedStream LED Status Indicators Page Navigating the Management Interface Configuring the SpeedstreamWeb Browser Management Interface Menu Selections Menu Item DescriptionOn the Tools menu, click Internet Options Configuration ChangesView Network and Device Status General box, select Temporary Internet FilesOn the Simple Setup menu, click Change Password Simple Setup ProceduresSet or Change a Password Set the Time ZoneConfigure the WAN Connection On the Simple Setup menu, click Set Time ZoneStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Advanced Setup Procedures Configure LAN Gateway and Dhcp SettingsEnable Firewall Protection Enable Virtual ServerConfigure Special Applications Network Address Translation NATConfigure Miscellaneous Features Configure Client Filtering On the Tools menu, click Change Password System ToolsUpdate Firmware Reset RouterRestore Factory Defaults Backup SettingsClick Start/Settings then click Control Panel Installing and Configuring TCP/IPInstall the TCP/IP Protocol Configure TCP/IP for the SpeedStream Dynamic IP Allocation via a Dhcp ServerManual IP Configuration TCP/IP VerificationIs TCP/IP properly configured on your computer? Configuring Printer Services Install the Print Server ProgramSpecified location Select Port Name Configure the Printer Port Windows 95/98/NT/MEWindows Select Printer PortSelect Local printer then click Next Unix Systems 11. Select Printer PortTroubleshooting Appendix aTechnical Support Cables Cable Types and SpecificationsAppendix B Ethernet CableRJ-45 Pin Numbering RJ-45 Pin AssignmentsSerial Port Pin Assignments Serial Port to 25-Pin DCE Port on Modem DB-9 Port Pin AssignmentsSerial Port to 9-Pin COM Port on Computer Printer Port Pin Assignments Serial Port to 25-Pin DTE Port on ComputerPin Signal Name Direction DB-25 Printer Port Pin AssignmentsSpecifications Temperature