Siemens 2614 manual Specifications

Page 43

APPENDIX C

Specifications

WAN Interface

10BASE-T, 1 RJ-45 port

(1) DB-9 RS-232 port for PSTN/ISDN connections

LAN Interface

10BASE-T/100Base-TX

(4) RJ-45 ports

Printer Interface

Parallel

(1) DB-25 printer port

Management

Web management interface

Advanced Features

Dynamic IP Address Configuration – DHCP, DNS

Firewall – Client privileges, hacker prevention and logging, NAT

Virtual Private Network – PPTP, L2TP, IPSec

Backup Internet Connection – Dial-on-demand via secondary WAN port

Print server

Internet Standards

ARP (RFC 826), IP (RFC 791), ICMP (RFC 792), UDP (RFC 768), TCP (RFC 793), Telnet (RFC 854-859), MD5 (RFC 1321), BOOTP Extension (RFC 1497), PPP LCP Extension (RFC 1570), PPPoE (RFC 2516), NAT (RFC 1631), PPP (RFC 1661), HTML (RFC 1866), HTTP (RFC 1945), CHAP (RFC 1944), DHCP (RFC 2131), PPTP (RFC 2637)

Indicator Panel

LAN (Link, Activity), WAN (Link, Activity), Power

Dimensions

8 x 4.5 x 2 in. (203 x 114.3 x 50 mm.)

Weight

12.08 oz. (362 g)

Input Power

5V DC (2.4A)

Maximum Current

0.40A RMS max.@110V, 0.4A RMS max.@240V

Power Consumption

6.5 Watts max. @ 100-240 VAC

Heat Dissipation

144 BTU/hr max. @ 100-240 VAC

C-1

Image 43

Contents 2614 Table of Contents Appendixes Introduction Features and BenefitsAbout the SpeedStream Applications Package Contents Installing the SpeedstreamDescription of Hardware SpeedStream Before Starting Hardware InstallationInstallation Procedure System RequirementsConnecting the SpeedStream LED Status Indicators Page Web Browser Management Interface Configuring the SpeedstreamNavigating the Management Interface Menu Item Description Menu SelectionsGeneral box, select Temporary Internet Files Configuration ChangesView Network and Device Status On the Tools menu, click Internet OptionsSet the Time Zone Simple Setup ProceduresSet or Change a Password On the Simple Setup menu, click Change PasswordOn the Simple Setup menu, click Set Time Zone Configure the WAN ConnectionStatic IP Address Fixed IP Fill in the relevant fields under Secondary Dial-up Configure LAN Gateway and Dhcp Settings Advanced Setup ProceduresEnable Virtual Server Enable Firewall ProtectionNetwork Address Translation NAT Configure Special ApplicationsConfigure Client Filtering Configure Miscellaneous FeaturesSystem Tools On the Tools menu, click Change PasswordBackup Settings Reset RouterRestore Factory Defaults Update FirmwareInstall the TCP/IP Protocol Installing and Configuring TCP/IPClick Start/Settings then click Control Panel Dynamic IP Allocation via a Dhcp Server Configure TCP/IP for the SpeedStreamTCP/IP Verification Manual IP ConfigurationIs TCP/IP properly configured on your computer? Install the Print Server Program Configuring Printer ServicesSpecified location Select Port Name Windows 95/98/NT/ME Configure the Printer PortSelect Printer Port WindowsSelect Local printer then click Next 11. Select Printer Port Unix SystemsAppendix a TroubleshootingTechnical Support Ethernet Cable Cable Types and SpecificationsAppendix B CablesSerial Port Pin Assignments RJ-45 Pin AssignmentsRJ-45 Pin Numbering Serial Port to 9-Pin COM Port on Computer DB-9 Port Pin Assignments Serial Port to 25-Pin DCE Port on Modem Serial Port to 25-Pin DTE Port on Computer Printer Port Pin AssignmentsDB-25 Printer Port Pin Assignments Pin Signal Name DirectionSpecifications Temperature