Wacom PL-521, DTF-521 manual Adjusting pitch and phase

Page 29

DTF521_Manual.fm Page 27 Tuesday, February 28, 2006 10:36 AM

Adjusting pitch and phase

Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521/PL-521 is ﬁrst connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the resolution of your video card to 1024 x 768.

•In the Pen Tablet control panel, select the CALIBRATE tab.

•If you are working with multiple displays, be sure the display corresponding to the DTF-521/PL-521 is selected in the MONITOR menu.

•Click on the CALIBRATE... button to activate the calibration screen.

•Using the OSD controls, open the OSD menu and select the PITCH icon. Then adjust the pitch level so that the pattern of ﬁne vertical stripes displays evenly. (For details on changing the OSD settings, see Working with on screen display settings on page 24.)

•In the OSD menu, select the PHASE icon. Adjust the phase level so that the adjustment pattern shows clearly.

•After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

Customizing page 27

Image 29

Contents Pen Display This page intentionally left blank Introduction and Overview Temperature and humidity Precautions on USE and HandlingPhysical location EnvironmentHg Lamps Inside this Product Contain Mercury and Must be HandlingDTF521Manual.fm Page 4 Tuesday, February 28, 2006 1036 AM Contents Unpacking Your PEN Display Package contentsFront view PEN Display ComponentsRear view System requirements InstallationVGA connector LCD monitor installationAdapter may damage the unit LCD monitor cabling diagramDTF521Manual.fm Page 12 Tuesday, February 28, 2006 1036 AM Pen tablet cabling diagram Pen tablet installationUSB cable installation Next steps Software installationWorking with Your PEN Display Setting up your work areaPen components Using the penPen operations Opening the control panel CustomizingCustomizing the pen Control panel overviewCalibrating your pen display Control panel details Adjusting double-clickCustomizing the side switch button functions DTF521Manual.fm Page 22 Tuesday, February 28, 2006 1036 AM DTF521Manual.fm Page 23 Tuesday, February 28, 2006 1036 AM Factory presets, auto-sync, and user settings Adjusting the LCD monitor Working with on screen display settings Enter buttonMenu Position DTF521Manual.fm Page 26 Tuesday, February 28, 2006 1036 AM Adjusting pitch and phase Video Power consumption Power savingPower saving mode Sync If there is no display TroubleshootingTesting the DTF-521/PL-521 Verify that the tablet and pen are working General display problems Display troubleshootingDisplay ripples or ﬂickers VGA problemsGeneral problems Pen tablet troubleshootingTroubleshooting on DTF521Manual.fm Page 35 Tuesday, February 28, 2006 1036 AM Windows XP Windows-Speciﬁc ProblemsSupport. See Technical support options on Macintosh-Speciﬁc ProblemsTechnical support options Asia Paciﬁc English China Obtaining driver downloadsJapan Appendix CleaningCaring for your pen display Replacing the pen tipUsing an alternate mount or stand Windows XP or XP Uninstalling the DTF-521/PL-521Windows 98SE, Me, or Macintosh OSLCD monitor Product speciﬁcationsGeneral speciﬁcations Power adapter Purchasing parts and accessoriesPen tablet Pen model FP-320CE declaration Radio and television interferenceFederal Communications Commission FCC notice Warranty North and South America contact Warranty Service in the U.S.A. and CanadaWarranty Service Outside of the U.S.A. and Canada Europe, Africa and Middle East Software License Agreement License and WarrantyEntitlement to Use the Software Important Notice to CustomersGermany This page intentionally left blank Appendix